Mounting Hole Spacing on Demco A-Frame Trailer Coupler DM14793-81

Updated 04/03/2018 | Published 04/02/2018

Question:

HI I am looking at Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2inch Ball - Bolt On - 10K Do you have a dimension for the bolt holes distance from the top of the A-frame down to the bolt holes themselves? I am trying to figure where the holes will go on my Frame rail. Thanks.

asked by: Brett D

Helpful Expert Reply:

I went to our warehouse and measured the Demco A-Frame Trailer Coupler # DM14793-81 to get you the dimensions you need.

From the UNDERSIDE of the top plate, the part of the coupler that will actually contact the top of the A-frame, the hole centers are down 1-1/2-inches. If measured from the TOPSIDE of the coupler top plate the distance down to the hole centers is then 1-3/4-inches.

The side to side hole spacing is 3-inches on-center on each side of the coupler.

Each of these dimensions is shown in the linked photo that I prepared for you.

expert reply by: Adam R