Recommended Ball Mount and Hitch Ball Compatible with Tightening Tool 45007

Published 05/02/2018

Products Featured in This Question

Curt Hitch Ball Mount Tongue Sleeve

(7)

$29.95

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2634)

$18.95

Hitch Ball Bushing - 1-1/4" to 1"

(22)

$6.43

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1361)

$11.31

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3914)

$20.94

Curt Solid Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 10" Long - 12K

(62)

$71.32

etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome

(3660)

$23.75

Question:

Is the hole in the 45007 1" or 1-1/4"? it looks like 1" but does not tell in description.

asked by: Damian C

Expert Reply:

The Curt Hitch Ball Holder and Tightening Tool for Ball Mounts # C45007 will work well with the Curt Solid Ball Mount for 2" Hitches # C45313. The platform is the standard 2-1/2 inches wide. I recommend the hitch ball # A-90 for a 2 inch ball or # 19286 for a 2-5/16 inch option.

You may also want to consider # e98880 for a locking hitch pin to secure your investment and deter theft.

expert reply by: Jason S

click to enlarge

Damian

5/2/2018

Is the hole in the 45007 1" or 1-1/4"? it looks like 1" but does not tell in description.

Jason S.

5/2/2018

You have a good eye. I went to our warehouse to measure the hole on the Curt Hitch Ball Holder and Tightening Tool for Ball Mounts # C45007. The diameter is 1.02 inches so you will want the 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank # 63845 instead and if using that ball mount, you will also want the Reducer Bushing for Ball Mounts - 1-1/4" to 1" # 58184.