What Trailer Hitch and Wiring Will Fit a 2011 BMW X3

Question

Question:

will this hitch fit my new BMW? It has a unibody frame and even BMW does not have a towing package available for this yet.

asked by: Tom M

0

Expert Reply:

Yes, the CURT Trailer Hitch, # C13316, is designed to fit the 2011 BMW X3. I have included a link to the installation instructions for you to view.

If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # EBMK4, which comes with a ball mount, interchangeable ball set, pin and clip, and a carrying bag. For trailer wiring, use # 119250KIT. I have included links to the installation details and a video showing a typical installation.

expert reply by: Michael H

0

George L.

4/2/2020

I noticed that the Draw Tite hitch for my 2011 X3 has a higher capacity rating than the Curt. Is that important? Is it really a stronger hitch. Also, what mounting hardware do I need?

Chris R.

4/3/2020

The extra capacity on the Draw-Tite # 76226 isn't really important simply because the capacity of the BMW X3 itself is 3,500 pounds. So this will be your limit either way. The higher capacity could indicate a stronger hitch but it's honestly more likely that Draw-Tite simply choose to test its unit to a higher rating. Mounting hardware is included with both the Curt # C13316 and Draw-Tite so the hitch is all you need.

Answer 1

Of the hitches available for your X3, I recommend the Draw-Tite Class III hitch, part #76226. It's just a few dollars more expensive than the compatible Curt Class III, part #C13316, but the Draw-Tite model has a 750 lb tongue weight capacity,…

view full answer...

Answer 2

The Curt 2-inch hitch #C13316 is a confirmed fit on the 2015 BMW X4, both the xDrive28i and the xDrive35i versions. This is the only hitch option we offer for this vehicle. Although we have not yet had a local customer come in for on-site…

view full answer...

Answer 3

Hey, Bill! There was a recent design change to the hitch to make the connection between the cross tube and the hitch itself more streamline. Part #e84ZV is the upgraded hitch. I'll include a snip of the differences so that you can see them side…

view full answer...

Answer 4

Curt does offer a hitch for your 2018 BMW X4, their 2-inch Class III model #C13316. This installs using included hardware as outlined in the linked instructions. This USA-made hitch is designed to have a very clean and unobtrusive appearance on the…

view full answer...

Answer 5

Hello Hal, Congrats on the new ride! What is your favorite new feature? With any aftermarket hitch there is the possibility that the hands free tailgate sensor will be covered. So if you install B&W Trailer Hitch Receiver - Custom Fit - Class III…

view full answer...

Answer 6

Hi Alfredo! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C22RJ will indeed fit your 2026 Hyundai Palisade Hybrid. We haven't had the chance to install one of these quite yet, but I checked with Curt and they actually said…

view full answer...

Answer 7

Hey Edward, thanks for reaching out! I recommend using the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR as-is because adding the RockerBall will just add more potential for uncontrolled movement as they might work against each…

view full answer...

Answer 8

Hi Marvin. Great question. The best option I’ve personally seen work well on Brinkley travel trailers with the propane box is the B&W Continuum (part #BW78FR if you have a 2-inch trailer hitch on your truck or #BW28FR if you have a 2.5-inch…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What Trailer Hitch and Wiring Will Fit a 2011 BMW X3

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching