Do CE Smith Bunk Brackets # CE10192GA-4 Have a Weight Capacity
Updated 04/18/2018 | Published 04/16/2018
Question:
Current bunk configuration is hitting the strakes on my boat. I wanted to remove the most forward portion of the bunk boards, which is about 4ft and create a new bunk placement for the bow. Will this part work on a C channel cross member? The trailer cross member is not tubular thus the amount of surface area is reduced. What is the weighted rate load limit for this item? Thank you for your help. All the best,
asked by: Eric C
Helpful Expert Reply:
Based on the picture you submitted it looks like your trailer was originally intended for a different boat and you'd need to made some modifications to it to get all of the bunks to fit the hull proplerly.
The CE Smith Double U-Bolt Bolster and Swivel part # CE10192GA-4 don't have a weight capacity that is stated aside from CE Smith saying they will basically have the same weight capacity as the bunks that are installed on them.
Ideally you'd box the frame of your trailer where you wanted to install the # CE10192GA-4 as that will provide it with more support.
Product Page this Question was Asked From
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 11-3/4 Inch Tall
- 2 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: How Much Weight Can the CE Smith Bolster and Swivel Bracket Assemblies Hold
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Q&A: Replacement Bunk Brackets for Older Grady White Seafarer Boat Trailer
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long - 1 Pair
- Article: Trailer Lighting Requirements
- Search Results: bunk boards boat trailer parts
- Q&A: Recommended U-Bolts, Rollers and Boat Trailer Lighting/Wiring for a 1984 Shoreline Trailer
- Q&A: Weight Capacity And Parts Needed For Modifying Boat Trailer For 26 Ft Regal Commodore
- Search Results: surge brake master cylinder
- Search Results: surge brake actuator
- Search Results: trailer lights
- Video: An In-Depth Look at the Trailer Square U-Bolts (Qty 2), 2-1/8" x 4" x 7/16"
- Video: Breaking Down the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies
- Video: A Closer Look at the CE Smith Heavy Duty, Vertical Bunk Brackets
- Video: All About the CE Smith Carpeted Bunk Boards for Boat Trailers
- Video: Breaking Down the CE Smith Bolster and Swivel Bracket Assemblies
- Search Results: swivel bracket
- Search Results: installation videos
- Search Results: keel roller bracket
- Q&A: u-bolt
- Q&A: What Does the Diameter of the U-Bolts Need to be for the CE Smith Bracket Assemblies # CE10190GA-4
- Q&A: Is Half Kit of CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies Available
- Article: Printable Trailer Bolt Hole Pattern Template
- Video: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel Review