Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.
Features:
Specs:
Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers. They allow a mounted bunk board, which runs from the front of the trailer to the back, to tilt to accommodate and support boat hulls of different sizes. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Great price on my Double U-Bolt Bolster and Swivel Bracket assemblies. Heavy duty and just what my trailer needed to to haul my Key West 1720 boat.
PERFECT! Rugged, easy to adjust to my highly adjustable jet ski trailer, and straightforward to install. It took lots of time to get them right, but that's because I used three, not two, pairs in order to match the contour of my bunks to my hull shape. I also run the nose of my ski high so the bilge drains, and the wide adjustment range provided quite a bit of slope. Once I got 'em where I wanted them, I cut off the low-hanging rearmost bracket excess in two minutes with a diamond grit circular saw for better ground clearance in rough terrain. These brackets look like they will outlast the trailer, and if I ever swap jet skis, I can re-contour the bunks easily if necessary. The brackets look well-galvanized, but I can't comment on their salt protection because I'm in fresh water. IMO, this is yet another innovative, rugged winner from CE Smith.
I bought a 2007 16' Carolina Skiff for $3500 back in December. The dealer said there was nothing at all wrong with it and he went over it and winterized it. I finally got around to putting it in the water and saw that the bunk boards were in terrible shape, with one side rail guide-on falling off. I took it to a marina repair shop and was told it would be cheaper to buy a new trailer instead of replacing the bunk boards. I contacted Ashley at etrailer about buying a set of bunk boards and all of the brackets and hardware for it. $370.00 later I had a full set of bunk boards and guide-ons being shipped to me. I don't think I could find a new trailer for that price. It took longer to remove the old ones than it did to put the new ones on. About 3 hrs later I had a new trailer. These bunk boards and guide-ons fit my boat and trailer perfectly.
Thank you Ashley and etrailer for great customer service and a very good product at a really decent price.
Thank you for reaching out to me. Well what do I think, I think I bought the wrong thing. One it’s heavy duty I don’t need heavy duty. And the pre-drilled holes in my trailer are too wide for the holes drilled in the brackets. You guys did a great job I think I made a mistake. Thank you again for reaching out to me.
Our 1999 yacht club trailer was brought back to life totally stripped down sandblast it primed ,repainted it now has all new hardware, new bunks , New LED lights but by far the bank hardware is absolutely strong and durable And rest a sure I will never Have to replace these top-quality bunk hardware Also a big shout out to e-trailer to getting my merchandise within five days
Great product and experience
Great Product, great service
great products
The brackets are strong and well built to last for a few years and I love that they are adjustable.
Good product at competitive price. Will use etrailer for future needs.
Very robust. Exactly what I needed. Excellent product and service from etrailer.
I am a commercial crabber. Needed quality parts for my boat trailer fast. Parts arrived quickly and I'm back on the river making money!! Thank you etrailer!!!!
Product is just as described and will be a great replacement for the old brackets. Quality, shipping, and customer service were top notch. Will be doing business again very soon and I would highly recommend this product and company!
What I loved: VERY solid construction. Never have to worry about that part giving out.
Recommended u-bolts were a perfect match.
How to install video was really helpful.
Installation was relatively quick (counting removal of old roller parts and installation of new bunk hardware and bunks: just under two hours).
Adjustable height of bracket and ability to change angle of bunk made it easy to match the fit of the new bunks to the hull.
Very pleased with ordering process and delivery. Especially liked that when one part of my order was not available right away (no big delay), I was given the choice to have the first part shipped immediately or wait until the entire order was ready (my choice).
Absolutely, would use this part and company again.
They are good quality and work as they should
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Terry
8/17/2020
Excellent. Have taken trailer on two trips of over one thousand kilometers including some gravel road, zero issues. Thank you. Terry