Hollywood Racks TRS 2-Bike Platform Bike Rack Recommendation for 2018 Chrysler Pacifica

Question

Question:

We decided on the Hollywood 3000, like the wide rails. Ordered from you last night. Just confirming this will fit on our Pacifica

asked by: Nancy B

0

Expert Reply:

As long as you have a hitch installed on your 2018 Chrysler Pacifica like the etrailer part # e98903 which is a 2 inch hitch or the part # C12180 which is a 1-1/4 inch, the Hollywood Racks TRS 2-Bike Platform Rack # HR3000 will fit and be a great option.

This rack is a nearly impossible option to beat. Normally the platform bike racks like this that only touch the bikes at the tires are very expensive and very heavy. This has a great price and isn't quite as heavy at 52 lbs. It's also very stable the hitch it installs in and doesn't move much.

I attached a review video and test course video for this rack for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The etrailer Trailer Hitch Receiver #e98903 is rated for 400 lbs tongue weight and 4,000 lbs towing, but that looks to be more than what your 2018 Chrysler Pacifica is rated for. When I looked up the online manual for your vehicle it looks like your…

view full answer...

Answer 2

Trunk mounted bike racks have to be totally removed before opening the rear hatch of a vehicle. The additional weight would make the struts that normally hold the door open unpredictable (most likely would fall) and a lot of the time the hooks would…

view full answer...

Answer 3

When installing a trailer hitch like #e98906 it is necessary to use a torque wrench to get the bolts to the right tightness. If not, and you just try to tighten them as hard as you can, you can damage the vehicle frame. Too loose and the hitch could…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 10

Hello Leah, thanks for reaching out. Yep, it sure will! The etrailer Trailer Hitch Receiver #e98903 actually fits all models of the 2023 Pacifica. That includes the hybrid and non-hybrid models. What will you be using the hitch for? Are you towing a…

view full answer...

Answer 11

Hey Nathan, yes the TowSmart hitch part #TS54ZR is similar enough to the Curt #C12180 that you could use it's install video as a guide for the install of it. This hitch does also come with bolt leaders as well to help get the install hardware…

view full answer...

Answer 12

Hello Shara, thanks for reaching out. I see that you already ordered the #e98903 hitch which is for the 2025 Pacifica, but I wanted to reply anyway to make sure all your questions were answered. To answer your first question, we do have a video…

view full answer...

Hollywood Racks TRS 2-Bike Platform Bike Rack Recommendation for 2018 Chrysler Pacifica

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching