Trailer Hitch That Fits 1997 Jeep Wrangler

Question

Question:

Will this guy work on 97 Jeep Wrangler Sport V6?

asked by: Darrin

0

Expert Reply:

There is a Class III 2" hitch that is a fit for your 1997 Jeep Wrangler, but that guy # DT78MR won't work. Instead I recommend the Curt # 13408, which has a maximum tongue weight capacity of 400 lbs and max towing capacity of 4,000 lbs. It is a bolt-on installation so no drilling will be required.

For wiring to add a 4-way you need the Hopkins # HM42605 which is a plug-in connector so you will not need to do any type of splicing. If you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.

You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise. I've also attached links to a video review of the ball mount kit and our page with each of our ball mounts as well as links to the other products I've mentioned.

expert reply by: Kyle S

0

Answer 1

Basically, there are 2 different ways on which you can install trailer wiring on a 1999 Jeep Wrangler. The Tow Ready Custom Fit Vehicle Wiring, #118409, plugs in line with the wiring behind the vehicle tail lights. Installation may take a little…

view full answer...

Answer 2

You will need to find out the towing capacity of your 2004 Jeep Wrangler and make sure the trailer you will be towing will be under the towing capacity of your Wrangler. Make sure the hitch you are using on your Wrangler will have enough towing…

view full answer...

Answer 3

The only stainless steel rear bumper we offer for your Wrangler with a hitch is part #RA8448, and is designed for accessories only and not for towing as you said. If towing is what you want a trailer hitch for I recommend a trailer hitch like part…

view full answer...

Answer 4

First thing you need is a trailer hitch. For that the #13408 that you referenced would be a great choice as it is our most popular option with other Wrangler owners. I attached an install video for this hitch for you to check out as well. Next thing…

view full answer...

Answer 5

The biggest difference between Curt Hitch #13430 and #13408 is that the #13430 has a round cross tube whereas the #13408 has a square cross tube. This difference is primarily an aesthetic difference since both of these hitches have the same towing…

view full answer...

Answer 6

The trailer hitch part #13408 comes with install bolts that are 7/16-14 x 1 3/4 and M12 - 1.75 x 50mm. These are Grade 5. If you were in need or replacement hardware you can order it from us with part #RHK.

view full answer...

Answer 7

Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Trailer Hitch That Fits 1997 Jeep Wrangler

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching