What Size Bolts Come with Curt Trailer Hitch part # 13408

Question

Question:

What are the bolt sizes to needed to install a curt hitch 13408 on a 2006 jeep wrangler

asked by: Roy

0

Expert Reply:

The trailer hitch part # 13408 comes with install bolts that are 7/16-14 x 1 3/4 and M12 - 1.75 x 50mm. These are Grade 5.

If you were in need or replacement hardware you can order it from us with part # RHK.

expert reply by: Jameson C

0

Answer 1

In order to replace the mounting hardware for your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #13408 you'll want the Replacement Hitch Hardware Kit #RHK. When you go to the page for the #RHK there is a field marked…

view full answer...

Answer 2

Basically, there are 2 different ways on which you can install trailer wiring on a 1999 Jeep Wrangler. The Tow Ready Custom Fit Vehicle Wiring, #118409, plugs in line with the wiring behind the vehicle tail lights. Installation may take a little…

view full answer...

Answer 3

First thing you need is a trailer hitch. For that the #13408 that you referenced would be a great choice as it is our most popular option with other Wrangler owners. I attached an install video for this hitch for you to check out as well. Next thing…

view full answer...

Answer 4

You will need to find out the towing capacity of your 2004 Jeep Wrangler and make sure the trailer you will be towing will be under the towing capacity of your Wrangler. Make sure the hitch you are using on your Wrangler will have enough towing…

view full answer...

Answer 5

The only stainless steel rear bumper we offer for your Wrangler with a hitch is part #RA8448, and is designed for accessories only and not for towing as you said. If towing is what you want a trailer hitch for I recommend a trailer hitch like part…

view full answer...

Answer 6

There is a Class III 2" hitch that is a fit for your 1997 Jeep Wrangler, but that guy #DT78MR won't work. Instead I recommend the Curt #13408, which has a maximum tongue weight capacity of 400 lbs and max towing capacity of 4,000 lbs. It is…

view full answer...

Answer 7

Hey John. To replace the hardware on the Curt Trailer Hitch item #14055, you'll need the Replacement Hardware Kit for Trailer Hitches item #RHK. You will want to go to the item #RHK product page and on the right side you'll put 14055 where it…

view full answer...

Answer 8

Yes we do have replacement hardware kits for this Curt #13408 hitch. You will want to go to the product page of Replacement Hardware Kit for Trailer Hitches #RHK and enter in your hitch item number, for examle, #13408. Then select the hitch…

view full answer...

Answer 9

Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…

view full answer...

Answer 10

The biggest difference between Curt Hitch #13430 and #13408 is that the #13430 has a round cross tube whereas the #13408 has a square cross tube. This difference is primarily an aesthetic difference since both of these hitches have the same towing…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Size Bolts Come with Curt Trailer Hitch part # 13408

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching