Does Draw Tite Hitch part # 75282 Fit 2009 Nissan Frontier and Allow Full Sized Spare to Fit

Question

Question:

Does this hitch work with the spare tire in place under the truck? 2009 frontier

asked by: reno

0

Expert Reply:

Yes, the Draw Tite hitch part # 75282 is a confirmed fit for your 2009 Nissan Frontier and will work just fine with a full sized spare like what you see in the picture I attached.

expert reply by: Jameson C

0

click to enlarge

Emmanuel

7/23/2025

Hitch is 1/4 of an inch away from rear leaf spring shackles = A moving part.

Reply

Jameson C.

7/23/2025

@Emmanuel It won't hit the shackle though. If that were the case it would have been designed differently but I understand your concern.

Reply

Answer 1

I would be happy to! To add a hitch to your 2024 Nissan Frontier, I recommend the etrailer item #e98869. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs…

view full answer...

Answer 2

In your 2017 Nissan Frontier, the Curt brake controller should be installed using the custom wiring adapter #C51382. This should work correctly to give you the proper wiring within your cab. Then you will use the Curt #C56226 or the Tekonsha #118266…

view full answer...

Answer 3

We currently offer three options for a 2024 Nissan Frontier; the etrailer #e98869, Draw-Tite #75282, and Curt #13241. Of the three the Curt and etrailer hitch options only real difference is just the finish with the etrailer having a matte black…

view full answer...

Answer 4

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

view full answer...

Answer 5

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...