Bearing Crossover for a Bearing Marked HR8 720SE

Updated 05/25/2011 | Published 05/23/2011

Products Featured in This Question

Replacement Race for 1779 Bearing

(1284)

$9.17

Replacement Race for L44643 and L44649 Bearings

(1284)

$5.00

Replacement Trailer Hub Bearing - L44643

(2141)

$6.42

Question:

do you have a crossover for abearing marked HR8 720SE, AND THE RACE HR8 7.20SE KE AXEL IS 1 OD. I would need 2 of each plus a seal. seal 2 1/32

asked by: Bob A

Expert Reply:

I tried to find information on the bearing and race you listed and no information is available pertaining to those markings. You said the axle is 1 inch OD so it sounds like the TruRyde Trailer Bearing, item # L44643, and the Race, forL44643, item # L44610, may be the correct parts for your application.

The # L44343 bearing has a 1 inch diameter bore and the # L44610 race has an outer diameter of 1.98 inches. If you measure the ID of your bearing and the OD of your race and they match, these parts will work for your spindle and hub.

expert reply by: Robert G