Solution for Trailer Hitch Install Hardware that Seems to Big to Thread Into Vehicle Weldnut

Question

Question:

what size bolts should I have with the hardware? It came with M10 1.25 x 30 but these dont seem to fit. it looks like the holes are smaller. please advise?

asked by: Tom J

0

Expert Reply:

The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are too small. I checked your order notes and you're up north where the winters are pretty harsh too so that makes this even more likely.

What you'll need to do it clean the weld nuts out so that you can thread the included bolts.

I have included a few links on hitch installation tips, cleaning weld nuts, and a video on cleaning weld nuts for you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Todd, For your 2021 CRV since it is a hybrid the Curt #C13397 is the lowest we have. There are 1-1/4" hitches out there however, they are not intended to fit the hybrid models so it will not work on your vehicle. The Curt Class 3 hitch…

view full answer...

Answer 3

I would be happy to recommend a hitch for your 2013 Honda CR-V. I saw you were looking at the etrailer item #e98868 and the EcoHitch item #306-X7297. Both of these hitches are confirmed to fit your 2013 CR-V. They are custom fit and bolt to your…

view full answer...

Answer 4

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 5

I would start by checking the fuse block on your 2024 Honda Pilot to determine if there is a plug inserted in the opening since it did not come with the factory tow package. If you can see the bottom of the terminal and the posts for the J-case fuse…

view full answer...

Answer 6

I can definitely help with that, Bob. I will start with a list of parts, then include a few important notes. Here are the parts I recommend for towing your 2012 Honda CR-V: - etrailer Invisible Base Plate Kit - Removable Arms #e98955 - etrailer SD…

view full answer...

Answer 7

When taking a longer road trip, or even a trip to the local park or trail, having easy and quick access to the hatch and cargo area is always something to keep in mind. A trunk mounted bike rack will not offer that convenience, but a hitch and hitch…

view full answer...

Answer 8

The big difference between Swagman XC, #S64650, and the Swagman XTC-2, #S64670, is the XTC-2 is capable of handling bikes with up to 66 inch long wheelbases, while the XC can handle bikes with a wheelbase up to 51-1/2 inches. In my opinion, if given…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver part #C13119 which is a fit for a 2016 Honda CR-V does require that you modify the a lower splash shield. I have attached a photo of what is required for you as well. That said, this will be unavoidable as all trailer…

view full answer...

Answer 10

To trim the underbody panel on your 2013 Honda CR-V for the installation of a Curt Trailer Hitch Receiver #C13119, I recommend marking the area that needs to be cut to start with. I have provided a graphic showing where this section is and the…

view full answer...