Hitch Vehicle Fitment for Hidden Hitch 87115

Question

Question:

What vehicle does a Hidden Hitch #87115 fit?

asked by: Trevor D

0

Expert Reply:

I confirmed with my contact at Draw-Tite/Hidden Hitch that the discontinued Hidden Hitch model 87115 was a confirmed fit for the following vehicles:

Ford Econoline Van E100 for 1975 - 1983
Ford Econoline Van E150/250/350 for 1975 - 2002

If you plan to re-install this hitch on a vehicle you will need new hardware since hitch mounting hardware is only intended for one use. It cannot be re-used a second time since it will not hold the torque value. You can use part # RHK for a new hardware kit. Just enter the hitch number 87115 in the space provided and select Hidden Hitch from the drop-down menu and click Add to Cart.

expert reply by: Adam R

0

Answer 1

Yes, the Draw-Tite Ultra Frame Trailer Hitch Receiver part #41945 is a fit for a 2001 Ford Van with step bumper. I have attached a photo below of the hitch installed on a model with a step bumper.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 9

Hi Barbara! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C33MJ will indeed fit your 2026 Mazda CX-50 Hybrid. It actually fits all version of CX-50 for this model year, so you are definitely good to go with it. Even with the PP,…

view full answer...

Answer 10

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 11

Hi Ray, To add a front hitch to your 2000 Ford E-450 Cutaway, you can use the Curt Front Mount 2" Receiver Trailer Hitch part #33055. It is rated for 9,000lbs of line pull, has a vertical load of 500lbs, and a GWVR of 5,000lbs. It will bolt…

view full answer...

Answer 12

Hey Chris, yes the part #MC62YR does have the 50.336 motor like you are looking for.

view full answer...

Hitch Vehicle Fitment for Hidden Hitch 87115

Product Page this Question was Asked From

Continue Researching