How to Install the Edge EZ for Dodge Cummins 5.9L 2003-2004 Dodge Ram
Updated 09/22/2017 | Published 09/21/2017
Question:
I have this installed on my truck. My dodge dealer was troubleshooting and unplugged it and zip tied it to another wire and never reconnected it. Im trying to find a user manual that will show me how to connect it but I cant find one. Can you provide a link to where I might find one showing how to reconnect it? edge product 2003 ezd1000c
asked by: Mike M
Helpful Expert Reply:
I am not sure which wire or step of the installation process you are referring to but I will walk you through the entire process below for future reference. In order to install the Edge EZ for Dodge Cummins 5.9L part # EP30203 on your 2003 Dodge Ram you will need to do the following steps:
1) The Power Edge EZ Module can mount on the flat black plastic fuse box cover located on the driver’s side fender. Adhere the module using the supplied velcro, allowing enough harness movement for removal of the cover.
2) Connect the supplied MAP sensor wiring harness to the supplied main wiring harness in the engine compartment. Disconnect the stock wiring harness at the boost sensor located on top of the intake manifold. Plug the supplied MAP sensor connector into the stock engine boost sensor and the stock engine wiring harness connector into the supplied MAP sensor connector.
3) Connect the supplied pressure sensor wiring harness to the supplied main wiring harness in the engine compartment. Disconnect the stock wiring harness at the sensor located on the main fuel rail on the driver’s
side towards the rear of the engine. Plug the supplied pressure sensor connector into the stock pressure sensor on the engine and the stock engine wiring harness connector into the supplied pressure sensor connector.
4) Using the 5/16” socket, loosen the two clamps securing the air induction hose to the air filter housing and the turbo inlet. Remove the hose and set it aside.
5) Using the pliers, remove the crimp style clamp from the hose on the brass fitting located on the now exposed lower front side of the turbocharger. Remove the hose from the brass fitting and dispose of the crimp style clamp.
6) Using the 7/16” wrench, unscrew the stock brass fitting out of the turbocharger housing. Using the 7/16” wrench, install the supplied brass fitting, tighten-be careful not to over-tighten. Slip the supplied hose clamp onto the stock hose, install the stock hose onto the supplied brass fitting and tighten the hose clamp with the ¼” socket. Reinstall the stock air hose onto the air filter housing and turbocharger inlet. Using the 5/16” socket, tighten both clamps securely.
7) Using the 7/16 deep socket tighten all of the intercooler hose clamps on the air intake.
Product Page this Question was Asked From
Edge EZ for Dodge Cummins 5.9L, 24V, Common Rail (CR)
- Performance Chip
- Performance Tuners
- Tuner Only
- No Display Screen
- Yes - California Approved
- EZ
- Edge
more information >
Continue Researching
- Search Results: trailer fender
- Shop: Tandem Axle Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Shop: Performance Chip Tuners
- Search Results: performance tuners performance chip
- Shop: Edge EZ for Dodge Cummins 5.9L, 24V, Common Rail (CR)
- Search Results: custom fit vehicle wiring
- Search Results: trailer wiring
- Search Results: valterra rv door locks
- Search Results: accessories and parts
- Search Results: rv window shades
- Shop: Alpha Systems Q130 RV Butyl Tape - 1/8" x 3/4" x 35' - White
- Shop: Trailer Wiring
- Shop: Bug Shield
- Shop: WeatherTech Custom Fit Hood Protector
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: How to Install: Titan Chain Snow Tire Chains w/ Cams for Dual Tires on your 2022 Ram 3500
- Shop: Tire Chains
- Q&A: Tips on Snow Tire Chain Use for a Truck with Dually Wheels
- Q&A: Wiring a 7-Way Round Pin European Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Performance Chip
