Recommended Breakaway Kit and Complete Wiring for 2002 WW 3 Horse Trailer

Updated 09/14/2017 | Published 09/13/2017

Products Featured in This Question

Hopkins Engager Trailer Breakaway Kit w/ Charger, LED Tester, and 5 Ah Battery - Side Load

(747)

$60.86

16-14 Gauge Butt Connector - 5 Pack

(31)

$4.30

12-10 Gauge Butt Connector

(23)

$0.86

Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot

(323)

$3.60

16-Gauge Bonded 3 Wire - per foot

(42)

$1.55

Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

(69)

$1.48

Wiring Kit for Hydrastar Electric Over Hydraulic Actuators

(12)

$83.84

Question:

I purchased a 2002 ww 3 horse slant load trailer. Im going to replace all wires for lights and brake away system. My question is what size battery and system do I get.

asked by: Tracey

Expert Reply:

For your 2002 WW 3 horse trailer, I recommend the etrailer 7-Way Molded Trailer Plug with Junction Box # HS381-9000 along with ring terminals like # 44-5310A for easy connection. For your light wiring, I recommend using the 16-Gauge Bonded 3 Wire - per foot # 16-3B-1 on each side for your ground, running light, and turn/stop functions. For your trailer brakes I recommend the # 10-2-1. You will want butt connectors like # 05731-5 and # 05732-2.

For your breakaway system, I recommend the Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Side Load # 20099 that will give you everything you need for a system compatible with your trailer.

I've attached some articles to assist with your wiring and with installing your breakaway kit.