Product Experts Available Now!
Call 1-800-940-8924
Thinline LED Trailer Utility Light - Submersible - 6 Diodes - Rectangle - Clear Lens
(22 reviews)
Price: $15.77
In Stock
Optronics
Thinline LED Trailer Utility Light - Submersible - 6 Diodes - Rectangle - Clear Lens
Part Number: UCL65CB
In Stock
$15.77
Retail:$32.59
You Save: 52%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (22)
- Q & A (0)
- Photos
Optronics Work Lights - UCL65CB
- LED Light
- Exterior Lights
- Surface Mount
- Rectangle
- White
- Utility Lights
- Optronics
3-7/8" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates an exterior area with bright light. Durable polycarbonate housing and lens. Surface mounts with bracket (sold separately). Accepts standard 1-wire or 2-wire plug.
Features:
- Waterproof LED trailer light illuminates an exterior area with bright white light
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Clear lens over white LEDs
- Durable polycarbonate housing and lens
- Surface mounts with mounting bracket (sold separately)
- Mounts on 3" centers
- Accepts industry standard 1-prong or 2-prong plug (sold separately)
Specs:
- Overall dimensions: 4" long x 1-1/4" wide x 1" deep
- Distance between mounting holes (center on center): 3"
- Diodes: 6
- Power draw at 12.8V: 0.048 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
UCL65CB Optronics Thin Line Sealed LED Trailer Utility Light - Submersible - 6 Diodes - Rectangle - Clear Lens
Alternate part number: UCL-65CB
Ratings & Reviews
4.6
22 reviews
by:
Richard
11/05/2017
Needed a replacement license plate lamp. This LED lamp is better quality than the oem lamp and is brighter too. Installed in less than a minute. Susan H took my order over the phone quickly and easily. She followed up through delivery.
by:
John
08/31/2024
I ordered these because the regular incandescent bulbs were burning out every 5-6 months or so, and I thought LEDs would be more durable. They aren't. More than half of them have died out during this past year, and they simply aren't worth the added cost. We're going back to standard bulbs.
Brooke M.
9/10/2024
Hmm...I think something must be off here because the LEDs should be lasting way longer than that. Have you already checked the wiring connections and made sure the ground wire was secured tightly to a clean location? Many times, all thats happened is wiring has come loose and retightening connections takes care of the issue. Let me know what you find out! P.S. These LEDs have a lifetime warranty on them as well if it turns out to be defect of some kind, just keep that in mind, too.
by:
John
04/15/2021
Snapped right into the old connector I had repurchased and added an auxiliary bed step light. Just bright enough with put being too bright.
by:
tony s.
04/21/2019
2010
Hyundai
Accent
i used these led lights as a grill accent on the front of my 2010 f150 they look awsome! i've had them for over a year now with no problems whatsoever. install was super easy, i was doing a custom install so i needed something with these specific dimensions. it was great to find the measurements online before i purchased!
see the attached photo for the finished product!
see the attached photo for the finished product!
by:
Brad J.
06/25/2017
2007
Chevrolet
Silverado Classic
The fit was perfect and easy to install for camper step light replacement. Delivered within 5 days!
by:
Tihomir
03/15/2021
I liked the frendly & efficient service when I called. Product was perfect for my trailer & it was delivered on time
by:
Mike D
01/11/2024
Great customer service and excellent product!
by:
UCL65CB
03/18/2019
GREAT CUSTOMER SERVICE
by:
Mike D
05/30/2024
Nice and bright lights, great replacement for the older halogen version of the same light. Satisfied!
by:
Horizon
11/04/2014
I used this for my tag light and it works great, The best part is it's "cool white" not "warm" LED color.
by:
Rusty
09/22/2026
by:
Ernie
04/24/2015
Easy install.
by:
Biil E.
04/26/2013
Excellent Product. Very Bright.
by:
Stickman and Leon the monkey
06/02/2024
Was just right for the light
by:
James
07/10/2021
by:
Ryan
10/13/2021
by:
Jeff
08/16/2021
2019
Forest River
Cherokee Alpha Wolf Travel Trailer
by:
James
10/21/2021
by:
Joseph
02/10/2025
by:
Richard
11/13/2022
2021
Dutchmen
Atlas Travel Trailer
by:
I
01/17/2023
by:
Ashley
09/15/2023
22
22
true
See what our Experts say about this Optronics Work Lights
- Replacement Clearance Lights 1-1/4" Tall, 3-15/16" Long and 7/8" Deep With 2 Prong Connectors We have the Optronics Incandescent # MC65RB and Optronics Thinline LED # MCL75RB that use a red lens. The Optronics Incandescent # MC65AB and Optronics ThinLine LED # MCL75AB have an amber lens. A Optronics ThinLine LED # UCL65CB uses a clear lens with red LED's, and the Optronics ThinLine LED # MCL65CAB is a clear lens with amber LED's. We will not have any with a white light and clear cover.
view full answer...
- If Trailer Light Is Sealed/Waterproof Why Does Boat Trailer Have to Be Unplugged Before SubmergingThe light, # UCL65CB, is waterproof since it is a sealed LED. But the wiring on a trailer isn't necessarily waterproof. To avoid any possibility of a short due to water unplugging the trailer before submerging it is the way to go.
view full answer... - LED Lights, Wiring and Mounting Brackets for Reverse Lights On a Boat TrailerI would use the Sealed, 6-1/2 inch LED Clear Oval Trailer Utility Light, 10 Diode, item # BUL72CB, along with the Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB, and the Trailer Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, Steel - Black Powder Coat, item # BK70BB. These items should work for you and have a specific mounting bracket that is not available for the Thinline Sealed LED Utility Light, item # UCL65CB. Be sure to unplug the trailer connection...
view full answer... - Looking for a White LED Trailer Utility LightHappy to help Jim, The Optronics ThinLine Clearance or Side Marker Light # MCL65CRB does have a clear lens but it lights up in red. If you're looking for a clear lens with white LEDs, the closest option is the Optronics ThinLine LED Utility Light # UCL65CB. This light has the same ThinLine design but uses white LEDs behind a clear lens. If you also need the mounting hardware, the Black Bracket and Single Wire Plug # A65PB is the correct bracket and wiring pigtail for the Thin Line series...
view full answer... - Interior LED Light Recommendation for an Enclosed 5 x 12 Foot V-Nose TrailerI would say that you would need a minimum of 6 of the Thinline Sealed LED Utility Light, # UCL65CB, to light up the inside of your enclosed trailer. Another option would be the LED Domed Utility Light, # ILL24CB. Two or three of these should provide sufficient lighting for your trailer. You would also need to wire them together, and run them to a switch, like # BL0108-00.
view full answer... - Do I Need A Mounting Bracket To Install Optronics Thinline Sealed LED Utility Light # UCL65CBI contacted our representative at Optronics and she confirmed that you must use a mounting bracket with the Thinline Sealed LED Utility Light, part # UCL65CB. The light will plug into the mounting bracket and is grounded through the attachment hardware to the trailer frame. For a black bracket, we have the Black Bracket and Single Wire Plug, part # A65PB. For a chrome bracket, we have the Chrome Bracket and Single Wire Plug, part # A67CB.
view full answer... - Wiring Guide for Installing Optronics Thinline Sealed LED Utility Light # UCL65CBThe LED light you referenced, Optronics Thinline Sealed LED Utility Light # UCL65CB, installs using a mounting bracket # A65PB. This base has a single wire lead for the +12V input; the ground connection is made through the mounting hardware. With the base mounted so that its grounding stud makes contact with bare metal on the trailer frame, you'll then need only to connect the one wire lead to the reverse light circuit on your trailer. You can use a circuit tester like # PTW2993 to confirm...
view full answer... - Wiring and Accessories Needed to Add Backup Lights to a Boat TrailerYou are going to want to run a separate wire from the new back up light(s) to the trailer connector. Depending on the type of trailer connector is on the trailer and on the vehicle you may need different connectors or adapters which I can help with. I just need to know the type of connector on the trailer and tow vehicle. For wire you can use # 16-1-1 which is sold in increments of 1 foot. So it you needed 20 feet you would enter 20 in the quantity box. I also recommend using wire frame...
view full answer... - Clear Submersible Marker Light to Replace Light on Boat Trailer Used as Reverse LightA license plate light such as # LPL91CB could work for you. It is 2-1/2" x 1-1/4". For something a little larger you could use # UCL65CB with mounting bracket # A65PB. The light is 4" long x 1-1/4" wide x 1" deep. We do have actual reverse lights, such as # BUL10CB, which is submersible. You would need to use pigtail # A47PB and a mounting bracket, # BK70BB, with grommet # A70GB for installation though.
view full answer... - Replacement Clear Lens and White Lights for Running Boards on a 2008 GMC SierraSurface mount LED utility light # UCL19CB might be a good option for you. It is a surface mount light so it will attach directly to the mounting surface and no additional bracket is needed. This LED light is sealed and waterproof as well. Another option is # UCL65CB. You would need mounting bracket # A65PB for black or # A67CB for chrome. I have linked a video review of this light for you.
view full answer... - What is the Power Draw for Optronics Thinline Sealed LED Utility Light, # UCL65CBAccording to Optronics, the Thinline Sealed LED Utility Light, # UCL65CB, draws 0.048 amps at 12.8 volts. The recommended mounting brackets for this light are Black Bracket, # A65PB, or Chrome Bracket, # A67CB.
view full answer... - Recommended White LED Utility Light Similar to Optronics # MCL63AB The closest option we have available to the Optronics Micro-Flex Thinline LED Clearance Light # MCL63AB that uses a white lens is with the Optronics Thinline LED # UCL65CB. This waterproof rectangular LED light has overall dimensions of 4 inches long, 1-1/4 inches wide, and 1 inch deep. Its 6 LED diodes should give you a much brighter and longer lasting unit compared to your existing incandescent models. This will work great to light up your entry steps and sewage connections. I have...
view full answer... - What is the Amperage Draw for Optronics Thinline Sealed LED Utility Light, # UCL65CBAccording to Optronics, the Thinline Sealed LED Utility Light, # UCL65CB, draws 0.048 amps at 12.8 volts. The recommended mounting brackets for this light are Black Bracket, # A65PB, or Chrome Bracket, # A67CB.
view full answer... - Is Thinline Sealed LED Utility Light, # UCL65CB Submersible for Use on the Back of a Boat TrailerThe Thinline Sealed LED Utility Light, # UCL65CB, is a sonically sealed waterproof lens and housing so it can be submerged. To mount this light you will also need bracket. You can use Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights, # A65PB. Or, you can use Chrome Bracket and Single Wire Plug for Thin Line Trailer Clearance and Side Marker Lights, # A67CB.
view full answer... - Recommended While LED Lights with Clear Lens for Courtesy LampsWe do not carry and clear lens with white LED in that # AL91CAB size. You may want to consider instead using the Optronics Sealed LED Utility Light - 2 Diodes - Clear # UCL13CPG or the Thinline Sealed LED Utility Light - Clear - 6 Diode # UCL65CB as an alternative. Another option is the Sealed Waterproof LED Utility Light # UCL19CB for a polished housing.
view full answer...
Do you have a question about this Work Light?
Info for this part was:
Written by:
Tyler C
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Carrie F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
11/5/2018
Still working good as new