Difference Between RockyMounts Monorail Bike Racks

Question

Question:

what is the difference between rockymount monorail hitch mount for part 10005 vs monorail2 bike platform rack tilting rky 10004 is it just the tilt thats the difference

asked by: Gary

0

Expert Reply:

The RockyMount Monorail listed as part # RKY10005 is actually an additional rail for the RockyMount Monorail 2 Bike Platform Rack, part # RKY10004.

The addon, part # RKY10005 cannot be used on its own and must be installed onto the Monorail Rack, part # RKY10004.

expert reply by: Jacob W

0

Answer 1

It sounds like you have the RockyMounts MonoRail Solo 1 Bike Platform Rack part #RKY10007 and are looking for a one bike add on. If that is the case, we have just what you need in the 1 Bike Add-On for RockyMounts MonoRail Solo and MonoRail part…

view full answer...

Answer 2

The expansion part #RKY10005 can be added to the RockyMounts MonoRail for 1-1/4 inch hitches part #RKY10007 to convert it to a 2 bike rack.

view full answer...

Answer 3

The big difference is that the RockyMounts MonoRail Solo 2 Bike Platform Rack #RKY10007-05 that you referenced can be used as either a single or two bike rack whereas the RockyMounts MonoRail bike rack #RKY10003 does not have the ability to do this.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Difference Between RockyMounts Monorail Bike Racks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching