Recommended Brake Assemblies and Drums for Dexter P-11 model SLR SND 490400 Axle

Question

Question:

Need backing plate and brake assembly and drums for Dexter Axle P-11 model SLR SND 4904000, Shackle kit for duel axle and triangle.

asked by: Rack M

0

Expert Reply:

I reached out to my contact at Dexter and based on the information you gave, they said is it a spring axle with a 3500 lb capacity.

Based on that, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 which comes with the backing plate and the 4 bolt mounting pattern.

For your drum assemblies, I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ if your wheels have lugs or the # 84546UC3-EZ if they have 6 lugs.

For your suspension system, I recommend the Dexter Heavy-Duty Tandem-Axle Trailer Suspension Kit for 1-3/4" Wide Double-Eye Springs # K71-449-00 which will give you the shackles and equalizers you need for your tandem axle system.

expert reply by: Jason S

0

Answer 1

I have a few options for you to help with identifying the axle capacity on your trailer. The first and easiest method is simply by crawling under the trailer and looking for the axle tag on the center of the beam. Depending on age, the axle capacity…

view full answer...

Answer 2

P15 isn't a way to identify what axle you have but if you can find the label/sticker on it that lists it's capacity or get me diameter of it I can see what parts you'd need to add brakes to it.

view full answer...

Answer 3

Hey Ryan! The best grease seal replacements for your Dexter K71-305-00 are the Grease Seals 10-36 (pair) #RG06-070 which have the exact dimensions you're looking for and are the "tried and true" go-to that we carry.

view full answer...

Answer 4

Thank you for the image of the axle tag for your Dexter D80 8,000LB axle. This will require the 10-36 Grease Seals #RG06-070 you found. Here is a list of the other components your axle uses should you want to replace or find any parts worn. Inner…

view full answer...

Answer 5

Hey Joel, we can definitely help with that. Since we know your 2024 Brinkley z3100 has tandem 7k axles the correct Roadmaster Comfort Ride system you need is the part #RM-2460-2570 which comes with everything you'll need. Then for a disc brake…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Recommended Brake Assemblies and Drums for Dexter P-11 model SLR SND 490400 Axle

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching