Parts Needed to Add Brakes to 2002 Pace American Cargo Sport

Published 12/08/2021

Products Featured in This Question

Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K

(1722)

$150.51

10 Gauge Wire - Blue Primary - Per Foot

(109)

$1.84

Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load

(219)

$65.28

etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K

(3304)

$153.61

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1963)

$111.43

Question:

Thanks for the quick reply Jameson, I don't see any stamping in the steel. Here are the images of the sticker and flange. Thanks,

asked by: Thomas D

Helpful Expert Reply:

P15 isn't a way to identify what axle you have but if you can find the label/sticker on it that lists it's capacity or get me diameter of it I can see what parts you'd need to add brakes to it.

expert reply by: Jameson C

Brake Flange
(click to enlarge)

Axle Label
(click to enlarge)

Thomas D.

12/8/2021

Thanks for the quick reply Jameson, I don't see any stamping in the steel. Here are the images of the sticker and flange. Thanks,

Jameson C.

12/8/2021

Thanks for the pictures, based on that you have a Dexter #10 axle which has a 3,500 lb capacity. For 3,500 lb axles you will use 10 inch assemblies. My recommendation is the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These assemblies will work well for your axles. If you don't already have the hub/drum assemblies, then I recommend using the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K. This combination will work well and if you are adding brakes for the first time then you will just run # 10-1-1 wiring to each assembly. You'll also need the junction box part # 277-000141 and the breakaway kit # 3802308.