Trailer Wiring Recommendation for 2017 Chev 3500 Express Passenger Van

Question

Question:

How do we know if it is wired for towing and which wiring harness do we need.

asked by: Todd

0

Expert Reply:

If you are in need of trailer wiring for your 2017 Chevy Express (meaning there is none present), then you do not have the towing package and would need the 4-way harness part # 118392 which is a confirmed fit.

I attached an install video for this kit on a 2017 Express Van just like yours.

expert reply by: Jameson C

0

Answer 1

For your 2017 Chevrolet Express Van we do have brake controller solutions but the vehicle does not have a port under the dash for installing a brake controller. Instead it has wiring available under the dash or sometimes the driver side floor mat up…

view full answer...

Answer 2

Yes, we have the Curt trailer wiring harness part #55540 which is a confirmed fit for your 2017 Chevy Express Van to add a 4-way to it.

view full answer...

Answer 3

To install a 7-blade in your 2017 Chevy Express van, presumably for a brake controller, you are going to need to do some hard wiring. For a brake controller the first thing you'll need is to add 4-way #118392 and I've added a link to a video…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Trailer Wiring Recommendation for 2017 Chev 3500 Express Passenger Van

Featured Help Information

Miscellaneous Media

Continue Researching