Parts Needed to Add Timbren Suspension and Electric Drum Brakes to Tear Drop Trailer Build Project
Updated 08/08/2017 | Published 08/06/2017
Products Featured in This Question
Question:
I plan to make a tear trailer. Timbren Axle-Less Trailer Suspension System A20RS545 I want to buy this product. But I wonder if I need anything else. I dont want the brake system. Can i use without Electric Trailer Brake Assembly? Just with Timbren Axle-Less Trailer Suspension System A20RS545? If i can... Item # H20044 Code: HM40975 Can I use these? And for my cherokee 2015 limitede Please recommend Vehicle Wiring Harness... 4pin? 7pin? I will wait for the reply. Thanks. Have a good day!!!
asked by: Kim D
Expert Reply:
Timbren offers their axle-less trailer suspension systems in many configurations, some with brakes and drums, others with idler hubs for applications without brakes. All of their kits are shown on the linked page.
A trailer can require brakes based on its gross weight, GVWR. You want to choose the Timbren kit that matches the trailer's intended GVWR. You do not want to pick a system that is rated for more weight than your trailer will have as this will tend to produce a rougher ride. The kit you referenced, part # A20RS545, is rated for 2000-lb trailers and includes idler hubs (no brakes). This is probably a good choice for the weight of a tear drop trailer. You can check your state laws for trailer brake requirements based on the completed trailer's expected dimensions and weight.
If your trailer will weigh enough you could use the 3500-lb-rated kit # A35RS545E which includes electric drum brakes and hub/drums, bearings, seals, etc. Electric brake installation on your trailer will require a 7-way plug like # H20044, a wiring junction box like # 38656 and 10-gauge wiring like # 10-1-1 to wire the brakes. You will also need other items including a breakaway kit, wiring connectors and a trailer brake controller such as the Prodigy P2 # 90885.
If your Cherokee does not have the tow package you will install the P2 using kit # ETBC7 and 4-pole kit # 118605. These items give you all the parts needed to hardwire the controller and install the required 7-way socket on the Cherokee.
You can refer to the linked article for a complete recap of the items needed to add electric drum brakes to a trailer.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Jack w/ Tongue Weight Scale - 7-Way - 18" Lift - 5,000 lbs
- Shop: Kenda Karrier KR35 ST185/80R13 LRC Radial Trailer Tire w/ 13" Black AM09 Wheel - 5 on 4-1/2
- Search Results: st185/80r13
- Search Results: timbren
- Search Results: 14125a
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 1.99" Diameter - Qty 2
- Shop: Lippert Grease Seals - Double Lip - ID 2.25" / OD 3.376" for 5,200-lb to 8,000-lb Axles
- Shop: Timken 02420 Replacement Race for Bearings 02475, 02476, and More - Qty 1
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
- Shop: CURT Breakaway Battery Box for 12V Trailer Breakaway Batteries - Lockable Lid
- Q&A: Recommended Back Up Camera for Boat Trailer
- Shop: Truck Bed Camera
- Q&A: Parts Needed For 7,000 lb Timbren Axle-Less System to Replace Tandem Axles
- Q&A: Compatibility of Installing the Timbren Axle-Less Suspension System on an Aluminum Trailer Frame
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer wiring
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
on Trailer Axles
