Wiring Harness for 2016 Buick Enclave Without Tow Package

Question

Question:

need a trailer wiring harness for 2016 Buick Enclave WITHOUT tow package.

asked by: CHRIS P

0

Expert Reply:

The trailer wiring harness you would want to use with your 2016 Buick Enclave that does not have a tow package is the T-One Vehicle Wiring Harness # 118270. This kit comes with the necessary fuses and relays to activate the tow package since your Enclave did not come with it.

I have included a link to an install video of this harness being for you to take a look at.

expert reply by: Kyle S

0

Answer 1

We have a very easy to install trailer wiring kit for your 2015 Buick Enclave that comes with needed relays and fuses to easily activate the tow package wiring of the vehicle with the Tekonsha kit part #118270 for a 4-way or part #118271 for a 7-way.…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver #CU29FR for your 2020 Chevy Traverse is recessed pretty far back, so you should not have any issues replacing the fascia after installing the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118287. I do…

view full answer...

Answer 3

Hi Kendall! The 2022 Chevy Traverse and 2022 Buick Enclave do indeed use the same hitch, like the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76184 you were looking at. 2018 - 2024 Buick Enclave 2018 - 2023…

view full answer...

Answer 4

I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver #76184 on your 2023 Chevrolet Traverse. This receiver is designed to install behind your rear fascia and is accessible by the removable panel on the rear fascia. It has a welded tab…

view full answer...

Answer 5

It sounds like you might be looking to tow a trailer with brakes using a 2020 Chevrolet Traverse. If that is the case then I have some great options. That said, there are no wiring adapters for the brake controller which is why I recommend the Curt…

view full answer...

Answer 6

If you need the 4 pole connector on your trailer, I would recommend the Tekonsha T-One Connector #118761 over the Curt #C56394. It provides more length for your installation, heavier duty wiring, with a more robust dust cap construction. The mounting…

view full answer...

Answer 7

First you will need the Curt Trailer Hitch Receiver #CU29FR for your 2024 Buick Enclave. This receiver will sit behind the factory removable panel on your rear bumper so you will have a clean appearance. Depending on your trailer you will need either…

view full answer...

Answer 8

The most concealed hitch for your 2023 Chevy Traverse is going to be the Curt Trailer Hitch item #CU29FR. This hitch is custom fit and bolts to your Chevy with included hardware. I really like the Curt item #CU29FR because it installs behind your…

view full answer...

Answer 9

If your 2021 Chevy Traverse has the factory tow package then it can tow up to 5,000lbs according to the online version of the owner's manual (I recommend checking your manual to verify). GM normally offers a more expensive hitch for the factory…

view full answer...

Answer 10

The Curt T-Connector Vehicle Wiring Harness item #C56394 for a 4-way or item #C56393 for a 7-way is what I recommend for your 2020 Chevy Traverse. These are custom fit and quite a bit easier to install when you're putting the hitch on. Just like…

view full answer...

Answer 11

Installing the Curt #C56393 on your 2020 Buick Enclave will give you a working 7-way at the rear of your vehicle. Since the Curt Echo #C51180 installs by plugging in-line with the 7-way at the back there is no need for additional wiring inside of the…

view full answer...

Answer 12

I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver #76184 for your 2023 Chevrolet Traverse. This will place your receiver behind the factory receiver panel giving you a clean factory appearance when you are not towing. For the wiring I…

view full answer...

Wiring Harness for 2016 Buick Enclave Without Tow Package

Featured Help Information

Miscellaneous Media

Continue Researching