Does Curt Hitch # C122343 Come with Mounting Hardware

Question

Question:

Hello, I have a 2005 Pontiac Vibe AWD and interested in adding a tow package. It looks like the Curt C122343 fit perfect. But does it come with the mounting bolts too?

asked by: Robert W

0

Expert Reply:

Yes, the Curt hitch part # C12234 that you referenced does come with all needed mounting hardware/bolts.

The bolts are M12-1.25x30mm

expert reply by: Jameson C

0

Answer 1

Hi Max! I see you placed an order already, but I still wanted to get you an answer. The All Wheel Drive actually will not dictate the hitch fitment for your 2005 Pontiac Vibe. What will is if you have the GT or not. If you have the GT, you will need…

view full answer...

Answer 2

The CURT hitch you would want for your 2011 Toyota Matrix AWD XR would be a CURT Trailer Hitch #12221. I attached installation instructions for you to check out also. You will need to trim the lower fascia to install this hitch. The CURT Hitch #12234…

view full answer...

Answer 3

Hey Lawrence, thanks for reaching out. The Curt T-Connector #C56040 is correct for the 2025 Subaru Forester Hybrid. The factory harness plug should be in the rear cargo area behind the driver side access panel. If you remove the trunk floor covering…

view full answer...

Answer 4

Modifications cannot be made to Curt Trailer Hitch Receiver #C12234 without potentially impacting its durability and safety (and less importantly its warranty), but there are suggestions in regards to the issue you are having with it hitting the…

view full answer...

Answer 5

The available trailer hitches that are confirmed to fit your 2006 Pontiac Vibe all have 1-1/4 inch receivers. This is likely because the vehicle itself does not have the type of weight capacity that a higher class (and larger receiver opening)…

view full answer...

Answer 6

Hi Fred! The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e58ZV will weigh about 30 pounds (I say about as this hitch is currently going through some finishing touches for its design and the hitch for the…

view full answer...

Answer 7

You are definitely on the right track when it comes to not wanting to use an adapter for your bike rack. The only trailer hitches that are a confirmed fit for your 2004 Toyota Matrix have 1-1/4" receivers but if you let me know what bike rack…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does Curt Hitch # C122343 Come with Mounting Hardware

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching