Needing Replacement Telescopic Arms For Blue Ox Trion Tow Bar

Question

Question:

I see on your site you offer a replacement arm for the drivers side. My question is do you also offer the passenger side or is it the same or universal?

asked by: Mike D

0

Expert Reply:

For the Blue Ox Trion Tow Bar, # BX7520P, the Blue Ox Replacement Telescoping Arm, # 61-6691, will replace both left and right sides arms.

expert reply by: Jared P

0

Answer 1

We do carry the Blue Ox Apollo tow bar part #BX7470 which fits the 2-1/2 inch hitch size. We do not have a version that fits a 2 inch hitch. We do however have a higher capacity Blue Ox tow bar with the Trion part #BX7520P but this is designed to fit…

view full answer...

Answer 2

Great question. I have a solution for you: Blue Ox Trion Tow Bar - Car Mount - 2-1/2" Lunette Ring - 20,000 lbs #BX7520P. I recommend the blue ox if you need to handle 20,000 pounds. If you do not have a hitch receiver or pintle hook I recommend…

view full answer...

Answer 3

A lunette ring tow bar setup is typically used for heavy duty construction or agricultural applications. They are not exactly ideal for daily towing and generally do not provide the most comfortable ride as there is a lot of chucking and jarring…

view full answer...

Answer 4

Welcome back! There are no confirmed custom base plate fits for the 1996 Ford F-350 trucks so in order to flat tow it you would need to have Blue Ox universal base plates #BX88266 installed. A professional installation is recommended. For a…

view full answer...

Answer 5

The Blue Ox Universal Bolt-On Adapter Tabs - 20,000 lbs #BX88266 are not a confirmed fit for your vehicle, but I've attached a photo of the dimensions of the bracket to allow you to compare fit with tow hook location. The base mounting holes are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Needing Replacement Telescopic Arms For Blue Ox Trion Tow Bar

Continue Researching