Customers compare BW72SR to these similar products
Products Featured in this Video
Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this B&W turnover ball gooseneck custom installation kit for the Chevrolet and GMC trucks. Now this is a custom fit part. It is designed to fit the 2001 to 2010 Chevrolet and GMC 2500 HD short and long bed trucks, also fits the 2007 to 2010 Chevrolet and GMC 3500 trucks. And on a custom fit part like this, I do like to… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
B and W has the part #BWGNRK1062 as a fit for the 3500 long bed models of the 2007 Chevy Silverado and the #BWGNRK1067 as a fit for the 2500HD models. The bracket designs are quite a bit different and it looks like the holes in the truck frames are…
view full answer...Yes, you can reuse the center section of the B and W gooseneck hitch you have with the correct bracket kit #BWGNRM1012 and you'd be set. This is the bracket kit that your 2015 Chevy Silverado 2500HD uses.
view full answer...We don't carry just a hardware kit for the bolts of a B and W gooseneck hitch part #BWGNRK1313. Your best option would be to take the following list of bolts to your local hardware store so that you can piece together everything you'd need.…
view full answer...The Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BLU52XR can be used on the short bed version of the 2011 Ram 1500m but we don't typically recommend this since short bed trucks usually have issues with clearance between the truck cab and…
view full answer...It is not that hard to hook up to a 5th wheel hitch and the Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter item #BLU52XR is by far one of the most simple ones. I have linked a video below that will show you the steps. The main difficulty will…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...The OEM plug that would allow you to use the #HM40975-11933 should be found at the rear of your 2022 Ram 5500. Everything indicates that your truck has the rectangular factory plug that would allow you to use this wiring harness. Typically this would…
view full answer...We do have a B and W above bed fifth wheel rail kit that fits your 2015 Ram 2500 with the part #BWRVK2602 which would mean the bracket kit would be just the part #BWRVR2602.
view full answer...While we don't have a replacement hardware kit we can offer you for the #BWGNRK1016 I did attach a picture that shows all of the hardware you'd need that you could source at a local hardware store. I also attached an install video link for…
view full answer...If you have the center section of a B and W Turnoverball Gooseneck hitch already but need the hitch part #BWGNRK1067 all you need for the rails is the #BWGNRM1067 which is just the rails of that hitch kit.
view full answer...I spoke to my contact at B&W about the issues you are having with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1067 on your 2008 Chevrolet Silverado 3500. They informed me that the spring that…
view full answer...Here's a complete list of the vehicles that the B and W Turnoverball gooseneck hitch #BWGNRK1012 fits: 2011 - 2013 GMC Sierra 2500 - 6-1/2 Foot Bed 2011 - 2013 Chevrolet Silverado 2500 - 6-1/2 Foot Bed 2011 - 2013 GMC Sierra 2500 - 8 Foot Bed…
view full answer...