etrailer Invisible Base Plate Kit - Removable Arms
This item does not fit your vehicle
2008 GMC Envoy
These items fit your vehicle
2008 GMC Envoy
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you want your vehicle to keep a factory look when it’s not being towed, this base plate kit does just that. The invisible design leaves no crossbar or bulky brackets in sight, and the tabs stay on your tow bar so nothing sticks out from the bumper. Snap-in polyethylene covers keep dirt and debris out of the receivers, helping the arms slide in and out smoothly every time you hook up.
Connecting takes just a few steps—insert the tab into the receiver, twist to lock, and secure it with the included pull pin. The simple twist-lock design makes setup quick and solid whether you’re in your driveway or at a campsite. The bracket spacing is 23-11/16" center to center, and the bracket height is 16-1/2", so you can plan your tow bar alignment around those measurements.
This sturdy steel base plate is built to handle the stress of long-distance towing. The design spreads towing forces evenly across the chassis to minimize weight on the suspension. It bolts directly to the frame—no welding required—and includes all the necessary hardware for secure installation that’s ready for mile after mile of travel.
You don’t have to replace your tow bar to use this setup. It’s directly compatible with Demco, etrailer, and Blue Ox tow bars without an adapter. If you’re running Roadmaster equipment, just add the correct adapter (e98983, e98984, e98979, or e98981—sold separately). An electrical bracket is included so you can easily mount a round connector up front for a clean wiring setup.
This is a straightforward install you can tackle yourself on a weekend. The kit bolts securely to your vehicle’s chassis with no welding required and comes with clear instructions plus all mounting hardware. The included wiring bracket gives you a spot to attach your trailer wiring plug, keeping everything organized once installed.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Fit my 2018 Colorado 2WD manual perfectly. I disconnect the drive shaft and hose-clamp it to the gas tank cross-member when I flat-tow it. works perfectly
Very easy to install and I love the finished look. However I had to cut a couple of relief points in the rock guard in order to get the back two screws into place. Without these the rock guard would bind against these points on the base plate and not allow the rock guard to travel back far enough to reattached the screws. I have a 2025 Jeep Wrangler Sahara.
This is a great base plate, it really looks good and integrates well with the front of the jeep.
Easy installation on my F-150. Videos on website are very helpful.
They were easy to install and came with good instructions and pictures. This is the second vehicle I have installed this product on and etrailer is my go to.
Relatively easy install. Double check the skid plate templates. I had to change mine significantly, not just holes but slots from the top all the way to the bottom of the towbar. In the end, they look great they install well. Very nice system.
Heavy duty bracket. The included bracket for the electrical is also heavy duty.
Mounted on a 2025 Bronco with modular bumper. I did have to do a little additional cutting on the bumper to make it fit.
Easy installation if you watch the videos on the etrailer website.
I like the fact that this base plate is hidden behind the air dam below the bumper.
Install of the baseplate itself was not difficult and went smooth. The templates to cut out the holes in my plastic shroud were not accurate. It took some additional trimming to get right and I found that a bit frustrating.
I have installed three base plates on my vehicles. All have been purchased from trailer. They have all been rather easy to install just a matter of taking the time it takes. On this last one mounted on my 2024 Ford Maverick I recommend adding to the instructions an easier way to unplug the light plug from the front facia. I think it is much easier if one turns the wheel full left and unplug the socket before pulling the facia. Easier than current instructions that say be careful when pulling the facia since the plug needs to be undone. I was able to do the whole thing by myself this way and not needed someone else to hold the facia while disconnecting the plug.
Nice setup. Instructions were little off for my application (2026 with shutters) Shutters had to be removed to install correctly. Instructions did not cover this. Everything fit as it should. Final product very satisfied.
2025 Ford Mavrick AWD Hybrid. I have installed 2 base plate kits on Honda CRVs.
Piece of cake. Remove front cowling..install base plate..done. Not so on my 2 day old Mavrick. 1 add a spacer to move kit away from shutters...adding washers is super poor planning on manufacturing's part..2 you don't have to go up & over in the middle now 70% of the condenser air flow is blocked by welded steel..could have been much better. 3 provide a mounting ring or hook...wrapping a safety cable around sheet metal components is silly Engineering.
Installation on a 2018 Jeep JL Unlimited Sahara went well, no surprises. Attaching the base plate to chassis safety cables required some ingenuity as the instructions were useless in this installation. Etrailer should post some actual installation photos vs. a poor generic diagram.
Easy to install and works like should. I put a aftermarket bumper on as well so it was simple with no issues to install I have pulled it over 6000 miles and a lot of one nighter stays. It is simple to hook up and no issues pulling.
Came very well packaged, looked great very well made and heavy duty.
Instructions could have been better.
Template for air dam cutout just a rough starting point you will need to do more trimming for proper fit. Overall very happy looks great and very solid.
I've bought from e-trailer several times and I'm always happy with my purchase. The base plate and tow bar are of excellent quality and a good price. Installation was as not too bad; I watched the installation video for my truck even though it was for a different base plate. It gave me enough information to get the job done.
Fit my Honda CR-V perfectly. Instructions were easy to follow.
There wasn't enough washers and lock washers for all the bolts but not a big deal because I had plenty of them around.
Only reason not 5 stars the instructions were not the best but got it done and happy with the result
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Katrina B.
8/30/2022
I see that you gave your experience with etrailer 3 stars. If you give me more information about why you are disappointed in us, I will be happy to assist you.