Factory Brake Controller Plug Location for 2018 Ford F-450 Chassis

Updated 06/14/2023 | Published 06/13/2023

Question:

Bought a voyager brake controler and a 3036-p oem wiring harnesss adaptor were is the port on a 2018 jayco redhawk 29xk to plug in?

asked by: James

Expert Reply:

It looks like your 2018 Jayco Redhawk 29xk was built on a E-450 cab and chassis. The Tekonsha Plug-In Wiring Adapter item # 22292 will plug into a port behind the instrument cluster finish panel in the center of the dash on the driver's side. I have attached some pictures below that will help you find it. You will be looking for a grey connector that has to be unplugged to expose the factory plug you need.

If it's not located there then your chassis may be an older one and you would need the Tekonsha Plug-In Wiring Adapter # 3034-P. The plug would be located near the passenger side of the dash towards the bottom. There was a model change between 2016 and 2017 and the wiring changed. Your 2018 Jayco Redhawk could have been built on the older cab and chassis. You should be able to check your owner's manual to confirm what year you have or call a Ford dealership and give them your VIN.

expert reply by: Jerred H