Replacement Inner Tube Recommendation for Trailer Valet XL to Replace Leaking Tire

Question

Question:

I recently bought one of these and use 2-3 times so far. It has been extremely useful in backing up my trailer into a corner. However, on the last use one of the tires starting leaking while on a slight incline. Luckily, I was able to lower the jack and stop it in place. Not sure what happened, now the tire holds pressure for few minutes and starts hissing right away once it moves. Tongue weight is 450lb, well under the limit. The part is barely a month old, not sure what my options are. Thanks for your help !

asked by: Kalyan K

0

Expert Reply:

If I had to guess the valve stem is bad and if you put pressure on it leaks. What you'd want to do is replace the inner tube with the part # TVIT.

expert reply by: Jameson C

0

Answer 1

I have a solution for you but there are no solid rubber tires for the Trailer Valet 5X item #STC-V211 There are solid rubber tires from Trailer Valet but those will only fit the XL versions. The rims are different and not interchangeable. We do offer…

view full answer...

Answer 2

For your Trailer Valet 5x the correct replacement inner tube is the part #TVIT.

view full answer...

Answer 3

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Replacement Inner Tube Recommendation for Trailer Valet XL to Replace Leaking Tire

Products Featured in This Question

Continue Researching