Install: Tuson DirecLink Base Model Trailer Brake Controller on a 2018 Chevrolet Silverado 1500 Video

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

We sell the Deka Wire #DK74FR by the foot as we get it in spools of 500 feet.

Hello James. It sounds like you are on the right track here, because the etrailer Class 3 hitch #e38KR is indeed the correct hitch for the 2024 Hyundai Tucson. For the wiring, the #CU94FR you mentioned is correct for the 2024 Tucson, but this will…

You can add a 7-way to your 2023 Santa Cruz using the Tekonsha #TK44ZR. This comes with everything you need to connect to your trailer. In addition to the 7-way you will also need a brake controller. For that I recommend the Redarc Tow-Pro Liberty…

So first of you are going to need the Curt Trailer Hitch Receiver #C23WR which I see you already found. And I do understand your confusion with wiring since you would think since it did not come with the receiver you would not have the factory tow…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

I don't believe a 2016 Volvo VNL780 has electric brake wiring since they are setup for the air brakes of a semi truck trailer but the Tuson DirecLink Base Model Trailer Brake Controller #335DL-100 can still be used as long as it has a 12 volt…

Yes you should use some kind of sealant on threaded fittings whether it is the tape or pipe dope. We recently had a propane manufacturer visit us for training so I can say for sure that yes you should use a sealant on threaded fittings. No sealant…

The Draw-Tite trailer hitch, #75726, will fit your 2008 Toyota Highlander with the factory OEM 19 inch full-size spare tire. There is a special note in the instructions which I have linked for you. The note states that when storing the spare, it is…

Yes and yes, all of the installation hardware needed to install the Draw Tite Hitch part #75726 on your 2008 Toyota Highlander are included. Also, you will be able to keep your spare tire in it's current location after the install is complete.…

The brake controller port for the 2015 Toyota Tundra is located behind the section of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's…