Will Wheels That Fit A ST235/80R16 Work With ST255/85R16 Tires?

Question

Question:

Totally respected the expert answer. In fact I have another! Will a load range F tire be appropriate on my E rated wheels?!

asked by: Jim E

0

Expert Reply:

The ST255/85R16 tires will fit on the same 16x6 inch wheels as the ST235/80R16 tires. There will be a substantial size difference though. It will change your width from 9.25 inches to 10 inches and your overall diameter from 30.79 to 33.1 inches. You will need to make sure that your 2014 Rushmore Monticello 35MC has the clearance for that difference on the internal distance between your frame and the shock absorbing height of your fenders for clearance.

We do not carry tires that are the ST255/85R16 size, but if you determine you just want to upgrade the St 235/80R166 size I recommend the Taskmaster ST235/80R16 Radial Trailer Tire - Load Range E # TTWTRTM2358016E. These have a range of 3520 lbs at 80 psi and a speed rating or up to 81 mph.

expert reply by: Jason S

0

Jim

7/7/2017

Totally respected the expert answer. In fact I have another! Will a load range F tire be appropriate on my E rated wheels?!

Jason S.

7/7/2017

Wheels are rated for capacity but are not typically given the letter rating. You will need to check the weight capacity of your wheel and compare it with the weight capacity of the tire. You will also need to make sure your valve stem is rated for the proper psi needed to operate your tire at max psi. The Americana Metal, Bolt-In Valve Stem - 1-1/4" Long - Over 100 psi # AM20906 will work for any of the tires we carry, where others are limited.

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 12

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Will Wheels That Fit A ST235/80R16 Work With ST255/85R16 Tires?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching