Dealer kit for Dexter Tow Assist ABS setup. Includes programming cable and a software voucher to configure axle count, tire size, and VIN. Contact your Dexter rep to activate and download the software.
Note: Software is not included. The dealer must contact their Dexter representative to obtain and activate the software that works with this kit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer. Let's take a quick look at this replacement ECU configuration kit for your Dexter Tow Assist ABS system. Now this Tow Assist ECU configuration kit is going to give dealers everything that they need to program and fine tune new installations for reliable performance right from the start. This basically is the tool that dealers are gonna need to set up or reprogram the brain of a Dexter Tow Assist anti-lock braking system. And as you probably know, the Tow Assist system uses an electronic control unit, an ECU to manage your trailer's ABS and sway control. But that ECU doesn't automatically know what kind of trailer it's on.
So it does need to be told the details. So that's where this kit comes in. This includes a USB to CAN adapter and table that's going to connect your computer to the Tow Assist ECU. So this is going to plug into this cable. Do I have that in the right direction Looks like I do.
So it's gonna plug in just like that. And then you'll wanna tighten down those screws. This will plug into your computer. Now this is a USB-A connection. So if you don't have a USB-A port on your computer, maybe you've got a USB-C, you will have to get a dongle to convert the USB-A to USB-C.
And then you will plug this part of the cable into your OBD2 port on your vehicle. So it's a pretty simple setup here. Now this does include a voucher for the installation software. You will need to contact your Dexter representative to obtain the Tow Assist configuration tool software. With the software, you are gonna be able to enter all the important setup information like how many axles the trailer has, the tire size, and other calibration details.
And once those settings are programmed, the ECU can correctly interpret the signals from the wheel speed sensors and control braking and sway mitigation properly. So again, if you don't already have the software, you will need to get that from your Dexter rep because this kit will be useless without that software. So again, this is designed for dealers and service centers. And this configuration kit's gonna be an essential tool for anyone installing or supporting the Tow Assist systems. It's going to ensure every setup meets Dexter's performance standards and that each trailer's ABS system is gonna be correctly identified and optimized. Along with everything that you see here in the voucher, instructions are also gonna be included. Guide you through the correct operation of this kit. Now, if you happen to have any other questions, whether it's about this kit or anything else that we carry here, don't hesitate to reach out to us. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.