Will Lippert Stabilizer Jack # LC298707 Replace 113407 Jacks

Question

Question:

I have a 2015 jayco eagle ht 32.5bhs fifth wheel and it has a lupper 113407 rear jack. Wondered if the lc298707 will fit. What is the width of this jack?

asked by: Jeff

0

Expert Reply:

The 113407 stabilizer jack you have now is the standard Lippert stabilizer jack. If you wanted to replace it with the part # LC298707 that you referenced you certainly could.

Overall width is 70-15/16 inches and the mounting hole centers are 68-11/16" apart.

expert reply by: Jameson C

0

Nancy W

4/14/2020

we have a 2009, 39ft, freedome elite, mk39 that has the 113407 rear stabilizer on it, we need to replace, is there a difference between the #lc298707 or #lc369774..ie will both of them work?

Chris R.

4/15/2020

Both the Lippert # LC298707 and # LC369774 will work great on your trailer - the stabilizers themselves are identical between these two part numbers. The only difference between the two is the type of switch that comes with it. The # LC298707 features a black waterproof switch and # LC369774 includes a white switch.

Nancy

4/16/2020

Thank you, we bought this used and the stabilizer bars etc were there but motor was missing, we replaced the motor, the motor is good however there appears to be something locked up inside the stabilizer assembly and its not turning to let them down, even by hand, can we buy just the stabilizer assembly by itself without having to buy a kit since we already bought the motor separate?

Chris R.

4/16/2020

Unfortunately just the stabilizer isn't available from Lippert without the included motor. The only way to obtain the stabilizer is to purchase the complete system. I wish I could have given you better news.

Answer 1

We do not have any electric jacks that are designed for what you are wanting to do as the jacks you are referencing are not designed to lift a trailer off the ground.

view full answer...

Answer 2

Hey Johnny, thanks for reaching out! I highly recommend using the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 as a replacement for your 8532-07 motor. According to my research your motor is rated for 5,500 lbs so this motor will…

view full answer...

Answer 3

Yes, the 30" lift Lippert High-Speed Power Stabilizer Jack, #LC298707 can be installed on the front and rear of a travel trailer. Please note that this jack is designed to stabilize your trailer an not to support the full GVWR. Do not use these…

view full answer...

Answer 4

For your 2008 Keystone Everest, I recommend the Lippert Components HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 or the high speed #LC141893 along with the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear…

view full answer...

Answer 5

Thanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The…

view full answer...

Answer 6

We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…

view full answer...

Answer 7

It depends on what kind of landing gear you have but it could be a gear issue too. If you could comment below or email me directly with a part number off of your landing gear I would be happy to help you troubleshoot. The Replacement Motor for…

view full answer...

Answer 8

Lippert has had some upgrades recently for the High-Speed power stabilizer jack so if your current one is from Lippert then the #LC298707 that you referenced is the correct replacement and will fit properly. Attached is a sample installation video…

view full answer...

Answer 9

The Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 will indeed fit your landing gear without modification. It will have the same bolt pattern as the #LC142178 you currently have, but will definitely have a higher capacity. If you…

view full answer...

Answer 10

In order to pick out a direct replacement for the landing gear on your trailer we would need to know the distance between the mounting brackets since the jack info on your 2006 Cruiser fifth wheel trailer isn't readily available. Otherwise you…

view full answer...

Answer 11

Thank you for providing that information. Based on that, I recommend the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010. These dual electric jacks are a universal fit so the mounting brackets will need to be welded to the frame of your 2019…

view full answer...

Answer 12

If some functions magically stopped working with your LCI system and the New-Style Linc Analog Remote #LC292614 then I recommend power-cycling your system to see if the system self-corrects. You'll do this by disconnecting the power connections,…

view full answer...

Will Lippert Stabilizer Jack # LC298707 Replace 113407 Jacks

Continue Researching