See what our Experts say about this CE Smith Boat Trailer Parts

• How To Determine Fit of the CE Smith Bunkboard Guide-On Kit CE27600K75
  I don't have any specifics on your boat or trailer but the main thing you need to check before using the CE Smith Bunkboard Guide-On Kit part # CE27600K75 is your frame size. This kit works with trailer frames 3" wide and up to 4-1/2" tall. However, it can also accommodate trailer frames 3" wide and up 6" tall if you use the CE Smith Extra-Long U-Bolt Kit part # CE11416. If your trailer frame is not 3" wide or taller than 6" tall then you would need to combine part # CE27609PG (4), part...
  view full answer...
• Should Bunk Boards Tilt While Loading the Boat on the Trailer
  The swivel brackets like part # CE10200G that you are referencing will allow you to adjust the angle of the bunk boards so that they can effectively contour to the shape of the pontoons on your boat. Once they are in the correct position you will then want to tighten them so that they do not move when the boat is loaded. You may also need to adjust the height of the brackets that attach the bunk boards so that they are making contact with the pontoons. If you are having problems with the...
  view full answer...
  
• Is There a Way to get a 14 Inch Bolster Bracket?
  We do have an option to get you to the 14 inches, but it will be parts that need to be purchased separately. So with that being said, the CE Smith Bolster Bracket # CE10102G will measure 12 inches tall and if paired with the CE Smith Swivel Bracket # CE10200G, it will get you to the 14 inches.
  view full answer...
• Replacement Boat Trailer Bracket for Bass Boat
  The bracket you described is closest to the CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 8-3/4" Tall - Qty 1 # CE10190GA. The CE Smith Bolster Bracket - Aluminum - 8" Tall - Qty 1 # CE10100A40 is similar and also corrosion resistant. These are the shortest options we carry. If you need the top, you can use # CE10200G or # CE10201G.
  view full answer...
• Replacement Parts For CE Smith Bunk-Style Guide-Ons Set # CE27660 To Build a Single Side
  We do offer the following replacement parts that will allow you to just get a single bunk guide like those found in the CE Smith Bunk-Style Guide-Ons Set # CE27660. Replacement Upright # CE27609PG Qty 1 CE Smith Swivel Bracket # CE10200G Qty 2 Replacement CE Smith Guide-On Mounting U-Bracket # CES94FR Qty 1 CE Smith U-Bolt Kit # CES44FR Qty 1 CE Smith Deluxe Marine-Grade Carpeting # CE11372 You will need to source the lumber for the bunk board and hardware for the swivel bracket locally...
  view full answer...
• Replacement Bunk Board Brackets for a Boat Trailer
  I do have options for you but none of them are specific to your boat trailer. However, bunk boards are fairly universal so I do believe we have options for you. If you are referring to the brackets that attach the posts for the bunk boards to the frame of your trailer then you can use part # CE11451-A as long as your frame does not exceed 3" wide x 4-1/4" tall and the guide posts like part # CE27609PG are 1-1/2" wide. If your frame exceeds 3" wide x 4-1/4" tall but not 3" wide x 5-1/4"...
  view full answer...
• Replacement Brackets for CE Smith Bunk-Style Guide-Ons for Boat Trailers
  If you are talking about the brackets that hold the posts to the frame then you could use kit # CE11452-A. If you are talking about he swivel brackets that hold the bunk boards to the posts then we have # CE10201G with 2 inch hole centers, # CE10206G which is a heavy duty bracket with 2-1/2 inch hole centers, and # CE10200G which is a standard duty bracket with 2-1/2 inch hold centers.
  view full answer...
• Recommended Boat Brackets In 10 Inch Tall Size To Allow Proper Draining With 8 Inch Rear Set
  For you application, I recommend the CE Smith Bolster Bracket - Galvanized Steel - 10" Tall - Qty 1, # CE10101G. This is 10 inches tall and 2-1/2 inches wide. With this product you will most likely want the CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1, # CE15283GA and the CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1, # CE10200G. We also have CE Smith Bolster and Swivel Bracket Assemblies - Galvanized...
  view full answer...
• Does the CE Smith Swivel Bracket Come with a Bolster Bracket
  The swivel bracket # CE10200G is just the L-shaped bracket. it can attach to a bolster bracket. To get the bolster bracket with the swivel already on it you can use one of the following: # CE10000G, 9 inches tall # CE10001G, 11 inches tall # CE10002G, 13 inches tall There are also sets of 4: # CE10000G-4 # CE10001G-4 # CE10002G-4 I have also included a link to the bolster brackets we carry with and without swivel brackets attached.
  view full answer...
• Could CE Smith Swivel Brackets be Used on Boat Lift with Bunk Boards
  Yes the CE Smith Swivel Bracket part # CE10200G would work great on the bunk boards of a boat lift like you have. Trailer swivel brackets and boat lift swivel brackets are essentially the same so they are interchangeable.
  view full answer...
  
• Can the CE Smith Bracket # CE10200G be Used to Secure 8 Foot Long 2x4s on a Boat Ramp
  The bracket, # CE10200G, could potentially work. You would place then every couple of feet on the ramp attached at those crossmembers that support the top deck of the ramp. But I have another possible solution for you that one of the other Experts came up with. You already have most of the ramp together so you could then attach some rollers, # DL21741, the length of the ramp and roll that jetski into the water. These rollers can be mounted directly to the surface of the ramp with the...
  view full answer...
  
• Is There a Weight Capacity for the CE Smith Swivel Bracket for Boat Trailers # CE10200G
  There isn't a set weight capacity for the CE Smith Swivel Bracket for Boat Trailers # CE10200G, if you used enough you wouldn't have a problem. When I've spoken to my contact at CE Smith I was informed that the limiting factor will how the brackets are attached to the trailer frame and not the actual brackets. So if U-bolts are used they would fail before the brackets.
  view full answer...
• Determining The Length Of Bolster Brackets For Boat Trailer Carrying Twin Trawler 10
  I was able to find the trailer you mentioned on the website for your Twin Trawler 10 and I see what you mean about the bunk boards being centered in-between the hulls. Since your boat measures 5" from the bottom of the trolling motors to the recessed part of the boat where the bunk boards will rest and your 8" bolster brackets are too short I recommend taking a simple measurement to make sure you get the correct length brackets without guessing on length. What you will need to do is with...
  view full answer...

Do you have a question about this Boat Trailer Part?