Recommended Brake Mounting Flange To Welded On Brake Assemblies
Updated 06/29/2017 | Published 06/28/2017
Products Featured in This Question
Question:
RE:question-233584 6,000 lb assemblies These all appear to be bold on assemblys, The problem is. the current assembly appears to be welded on, not bolted. Am I miss understanding what I am seeing? Thanks
asked by: Tom B
Expert Reply:
Thanks for the picture. Those assemblies look pretty rough and definitely need to be completely replaced, but are unlike anything I've seen. It looks like it was a custom job. I recommend removing them completely and having a professional welder add the Brake Mounting Flange for 3" Round Axle # 4-44-1 to your axle. This will need to be welded in place but will give you up to date braking assembly options that can be adjusted, and parts replaced as needed. I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA for your axles along with the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12 to mount them to the flanges.
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 25580
- Search Results: 25580 trailer hubs and drums
- Search Results: bearing 14125a trailer bearings races seals caps
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: How to Determine Size of Studs on 2016 Ice Castle Trailer
- Q&A: Adding a Brake Mounting Flange to Axle That Had Brake Backing Plate Welded To Axle
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Grease Seals 10-36 (pair)
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Suspension Enhancement
- Video: Ultimate Overview of the 12V RV LED Puck Light
- Shop: RV Interior Lighting
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: etrailer Electric Trailer Brakes Spec Review
- Video: All About the Trailer Hub and Drum Assembly
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: A Closer Look at the Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles
- Search Results: firestone air suspension compressor kit
- Video: Ultimate Overview of the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs
- Video: Checking Out the Firestone Air Command Standard Duty Air Compressor
- Q&A: Troubleshooting Leaf Spring Coming In Contact With Brake Mounting Flange Bolt
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Distance Between Caliper Mounting Holes on Replacement Caliper Bracket for DeeMaxx 6K Brakes
- Q&A: Length Measurements for EZ Lube Spindle 2.25
- Q&A: Replacement 12" x 2" Brakes For Trailer With Mobile Home Axles
- Q&A: Recommended Comfort Ride Leafspring Kit for a Trailer w/ 6,000 lbs Axles
- Article: Adding Electric Over Hydraulic Disc Brakes
on Accessories and Parts
