Recommended Brake Controller For 2016 Land Rover Range Rover With Factory 7-Way

Question

Question:

Obviously this is a different product than the electric trailer brakes I get for my fleet. I really am asking for my personal vehicle. So, how does it work? Do I need to get one for my boat trailer and a separate one for my utility trailer? Would it replace the need to have a electric brake controller inside the vehicle? Thanks.

asked by: Anthony D

0

Expert Reply:

There is not a confirmed fit wiring harness adapter for your 2016 Land Rover Range Rover. The brake controller that many people use is a plug and play option, but it is not the traditional mount to your dash assembly. It is the Curt Echo Brake Controller # C51180.

expert reply by: Jason S

0

Anthony

7/7/2017

Obviously this is a different product than the electric trailer brakes I get for my fleet. I really am asking for my personal vehicle. So, how does it work? Do I need to get one for my boat trailer and a separate one for my utility trailer? Would it replace the need to have a electric brake controller inside the vehicle? Thanks.

Jason S.

7/7/2017

The Tekonsha Prodigy RF Wireless Trailer Brake Controller does replace the need for a brake controller inside the vehicle. It uses the tail light function of your trailer wiring to identify when you hit the brakes in your vehicle. On top of that, there is a internal sensor that automatically adjusts trailer braking based on deceleration of tow vehicle. It still allows you the manual override for additional braking in the remote. You can transfer the remote easily between vehicles, but I recommend getting 2 units if you will regularly be towing 2 different trailers.

Answer 1

You need the Curt Trailer Hitch Receiver item #13456 for your 2016 Land Rover LR4. The Curt Trailer Hitch Receiver item #C13052 does not fit your vehicle. It is for a 2008 - 2015 Land Rover LR2. The Curt Trailer Hitch Receiver item #13456 is a…

view full answer...

Answer 2

The hitches we offer for your 2016 Land Rover LR4 are rated for use with weight distribution like the Curt part #13456. It's capacities with a WD system jump from 6,000/600 lbs to 8,000/800 lbs. For a system that would work well with those…

view full answer...

Answer 3

The Greystone Countertop Side-by-Side RV Griddle and Grill #WAY94FR does not have a cover, but the good news is that this is a smaller setup that only measures 25-3/8" wide x 20-1/2 deep x 10" tall so even if you need to keep it on your…

view full answer...

Answer 4

To my knowledge Greystone does not have any accessory lids or covers for their portable griddles, but we do offer thee Blackstone Griddle Basting Cover #BL39FR that you could use to cover a portion of the griddle while cooking.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Brake Controller For 2016 Land Rover Range Rover With Factory 7-Way

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching