Can a PullRite SuperGlide 2900 5th Wheel Hitch Use the Demco 5th Wheel Rail Adapter # DM6914

Question

Question:

Can I mount a pullrite 2900 autoslide to the Demco 6194 adaptor? Do you know how high the top of the rail sits in the truck?

asked by: Darren S

0

Expert Reply:

The PullRite SuperGlide model 2900 5th Wheel Hitch is designed to mount to industry standard (ISR) above bed rails.

The Demco 5th Wheel Adapter for the Chevy/GME OEM Towing Package, # DM6194, is designed to fit in the 2017 Chevrolet and GMC 2500 & 3500 trucks with OEM packages in 6-1/2 foot beds. The Demco adapter will mount a 5th wheel hitch that use ISR bed rails.

With that said, a PullRite SuperGlide that uses the ISR rails for mounting will fit the Demco adapter.

Note: This Demco adapter will only fit in the 6-1/2 foot truck beds. Any Chevy/GMC w/ OEM towing package and a 8 foot bed cannot use this adapter .

expert reply by: Jared P

0

Tim G.

3/30/2020

Can a demco hitch puller adapter be used on a pullrite 2700 superglide to lift it out of bed?

Chris R.

3/31/2020

I believe you're referring to the Demco Lift Bracket # DM6100. This bracket basically mimics a trailer king pin, so it can really be used with any 5th wheel hitch, including your PullRite SuperGlide.

Tim G.

3/31/2020

Thankyou. I have a 2 yr old Superglide and wish now I had a demco slider. But oh well. This pulling adapter may help in lifting my heavy superglide out of the bed with an electric winch I have.

Chris R.

4/1/2020

No problem at all. Just let us know if anything else comes up!

Tommy

9/4/2020

Hello, I have a pullrite superglued 2900 and just bought a 2020 GMC 2500 with the OEM factory pucks. Will the Demco 6333 allow me to use my pullrite and the factory puck system? Thanks

Jon G.

9/6/2020

Yes, the Demco Rail Adapter # DM6333 is what you need for your 2020 Sierra 2500.

Tommy

9/6/2020

@JonG Thanks so much! Also, my pullrite is not super glued (superglide) by the way. Lol

Answer 1

To attach the Valterra Eccentric Tank Reducer #T1041-1 to the rest of the plumbing on the RV and prevent leaks use the Valterra ABS Solvent Cement #A05-0303. It was made for exactly this purpose!

view full answer...

Answer 2

The Ford OEM puck system is different than the Chevrolet/GMC OEM puck system therefore, you can't use a 5th wheel hitch from one in the other. The Ford OEM system has pucks which are much closer together than on the Chevrolet/GMC OEM system. The…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 11

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Can a PullRite SuperGlide 2900 5th Wheel Hitch Use the Demco 5th Wheel Rail Adapter # DM6914

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching