Checking Out the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider Video

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey there Joe, that's an interesting question. The advantage of the Autoslide that fits directly into the puck system of your 2020 Ram 2500 - the Demco Autoslide 5th Wheel Hitch w/ Slider - Ram Prep Package #DM69GV - is really just simplicity.…

The Demco Hijacker Autoslide #DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Hello Aaron. The Demco 21K Autoslide 5th Wheel Hitch #DM89GV for The Ram factory prep package weighs 330 lbs.

Hey Lamar, The Demco Autoslide 5th Wheel Hitch w/ Slider #DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The only thing you might need…

The things that the 18K Demco Hijacker #DM8550034 and the 18K SuperGlide have in common are that they both offer 14" of travel, they are both automatic sliding 5th wheel hitches, have 2-point pivoting hitch heads, are compatible with industry…

Congrats on the new truck! To add a autoslider 5th wheel hitch you will first need to add a set of rails to your 2023 Ram 2500. There is no aftermarket way to add a puck system or below bed mounting method for an autoslider 5th wheel hitch. I…

Hey Mike; thanks for the question and the part number you asked about is not a fit for the 2020 GMC Sierra 2500. There isn't an Elite Series for your truck but there is a very nice alternative for an underbed gooseneck that does fit, the B&W…

Yes, it is! The Reese Sidewinder 5th Wheel King Pin with Rotating Turret item #RP34FR is indeed a compatible replacement for a Lippert Rhino pin box.

When determining the height of your 5th wheel hitch you'll need to measure the height from the ground to the floor of the bed (where the base of the hitch will be sitting) and the height of the ground to your king pin when the camper is level.…

The new Rhino Box from Lippert currently has no replacements so you won't be able to swap out this pin box with a Sidewinder to add more turning clearance. Because of this you'll have to use a sliding 5th wheel hitch in your 6.5' bed to…