Replacement Hub For A 1994 Rockwood 2040 Pop-Up Camper
Updated 06/02/2017 | Published 05/31/2017
Products Featured in This Question
Question:
Looking for a replacement hub for 1994 Rockwood 2040 pop up camper, its stamped AL-KO 7120 on the back side, 4 studs on 4inch bolt circle
asked by: Jim T
Expert Reply:
I called AL-KO and they informed me that there were two different hub assemblies for a 1994 Rockwood 2040 Pop-Up Camper. In order to choose the right hub you will have to do one of two things. You can either measure where the inner and outer bearing ride on the spindle using a digital caliper such as part # PTW80157 or you could remove the old bearings and note the part number stamped inside.
For a inner and outer diameter of 1.063" or part # L44649, you will need the Trailer Idler Hub Assembly part # AKIHUB-440-2-2K. For an inner and outer diameter of 1" or part # L44643, you will need the Trailer Idler Hub Assembly part # AKIHUB-440-2-1K.
I have attached a video that will show you how to properly measure the spindle diameters.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 570 x 8 tire
- Search Results: 570~8 trailer tires and wheels
- Video: Trailer Hub and Drum Assembly: The Breakdown
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Shop: Vehicle Tow Bar Wiring
- Q&A: Replacement 145/12 Trailer Tires and Wheel for Rockwood Freedom Pop Up
- Q&A: Difference Between Idler and Braking Axle
- Q&A: How To Find Correct Replacement Hubs for Rockwood Pop-Up Trailer
- Q&A: Replacement Axle Recommendation For Small Popup Camper
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Search Results: rockwood
- Search Results: electric drum brakes trailer brakes
- Search Results: 5 on 5 inch trailer hubs and drums
- Search Results: trailer hubs and drums
- Search Results: 175 80 13
- Shop: Custer Trailer Connector Adapter w/ Dust Cover - 7-Pole Round Pin to 7-Way Blade
- Shop: Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Curt Trailer Connector Adapter - 7-Way RV Style to 4-Way Flat - 60" Cord
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearing, Races and Grease Seal for 1992 Rockwood 2040 Pop-Up Camper
- Video: Review of the Replacement Lens for RVSTL61 and RVST61 Tail light
- Video: How to Install the etrailer Trailer Hitch Receiver on a 2009 Chrysler Town and Country
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Slipper Spring Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub