Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
Updated 03/27/2024 | Published 03/16/2024
Products Featured in This Question
Question:
Re: Timken L44649 - 471750 - L44610 I would like to replace the inner and outer bearings which are the same size along with the seals on each side and the race is needed on our boat trailer. Do you carry a Timken kit that covers these items? I may or may not need the races but figured they typically come with the bearings in kit form at least. Please advise Dave
asked by: Dave H
0
Expert Reply:
Product Page this Question was Asked From
Timken Replacement Bearing and Race Set #4 - L44649 and L44610
- Trailer Bearings Races Seals Caps
- Bearings
- Races
- Standard Bearings
- Standard Races
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- Timken
more information >
Continue Researching
- Search Results: timken l44649
- Search Results: timken
- Search Results: l44649
- Shop: Timken Replacement Bearing and Race Set #4 - L44649 and L44610
- Shop: Timken 470706 Grease and Oil Seal - I.D. 1.249" / O.D. 1.983" for 2K to 2.5K Axles
- Search Results: 1980
- Search Results: 44610
- Search Results: l44610
- Search Results: timken seal
- Shop: Lippert Grease Seals - Double Lip - ID 2.25" / OD 3.376" for 5,200-lb to 8,000-lb Axles
- Shop: Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Timken Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Video: An In-Depth Look at the Timken Grease and Oil Seal
- Q&A: Replacement Timken Recommendations for L44649 Bearings and 471750 Seals
- Shop: Grease Seal - Double Lip - I.D. 1.500" / O.D. 1.987" - 2,000-lb to 2,500-lb Axles - Qty 1
- Q&A: Can L44649 Bearings Replace L44643 Bearings
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Video: A Closer Look at the Double Lip Grease Seals (pair)
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 1-1/16 Inch BTR Spindle - DX59UR
- Video: What to Know About the Trailer Hub Assembly
- Video: Review of CE Smith Trailer Axles - Axle Spindle Parts - CES52QR
- Video: Checking Out the Timken Grease Seal
- Q&A: Recommended Hubs with 4 on 4 Bolt Pattern and Double Lip Seal for CE Smith 1.8K Trailer Axle Beam
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: Do I Need to Have a Castle Nut or Cotter Pin to Keep Spindle Nut From Backing Off
Dave H.
3/20/2024
Is there a "kit" that includes all of the requested parts or do they have to be ordered individually? I do see a bearing and race set but without the seals.