Height from Ground Draw Tite Hitch 76128 Has when Installed on 2017 Honda CR-V

Question

Question:

Greetings - what is the hitch height when Draw-Tite #76128 is mounted to a stock 2017 Honda CRV, Thanks in advance

asked by: Bill S

0

Expert Reply:

When we had the chance to install the Draw Tite hitch part # 76128 on a 2017 Honda CR-V the height from the ground to the top of the hitch opening was 13-1/4 inches. I attached a picture that shows this measurement as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Draw-Tite Hitch #76128 is an excellent choice for your 2017 Honda CR-V. We have not had a chance to install it on a 2017 CR-V so as of yet we do not have a photos or videos of this hitch being installed. The hitch itself is 8-1/4 inches from…

view full answer...

Answer 2

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 3

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Height from Ground Draw Tite Hitch 76128 Has when Installed on 2017 Honda CR-V

Featured Help Information

Miscellaneous Media

Continue Researching