Will 205/75-15 Fit In Place of 7.00-15

Question

Question:

Will a 205-75-15 tire fit in the place of a 7 x 15 tire?

asked by: Phil

0

Expert Reply:

The tire size ST205/75-15 like part # TR20515D will fit in place of a 7.00-15 as the widths are very similar but the tire height will be about 2 inches shorter overall.

expert reply by: Jameson C

0

Answer 1

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 2

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

view full answer...

Answer 3

As long as you have a 5 on 4-1/2 inch bolt pattern the #AM32545 that you referenced would be a great choice for a wheel and tire as it is a radial tire setup with a capacity of 2,540 lbs per wheel when inflated to the max psi of 65. I attached an FAQ…

view full answer...

Answer 4

The Dexter Electric Brake Kit #23-105-106-09 includes the left and right side brake assemblies which fit your Hayes axles. These have the 4 bolt mounting pattern which fits both AL-KO and Hayes axles and a 5 bolt flange for Dexter axles. The multiple…

view full answer...

Answer 5

It looks like a Hayes Brake magnet part number 73400. We do not carry this part but I did a quick internet search and was able to find a couple places that sell them. From the research I did it looks like this is an older style of brake magnet used…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Will 205/75-15 Fit In Place of 7.00-15

Product Page this Question was Asked From

Continue Researching