Identify Older Hayes Brake Magnet

Question

Question:

Can you identify what brand magnet this pic is and where I would get a replacement if I need one? Not there is an ear extending out with a hoe in it. What type trailer/axle was this magnet used on? It has 12 drums

asked by: Tom

1

Helpful Expert Reply:

It looks like a Hayes Brake magnet part number 73400. We do not carry this part but I did a quick internet search and was able to find a couple places that sell them.

From the research I did it looks like this is an older style of brake magnet used in the 1980's.

expert reply by: Jameson C

1

click to enlarge

Fred

7/30/2024

Where could I find these magnets

Jameson C.

7/30/2024

@Fred I am not able to find anything at this time. It was years ago that I answered this question and parts must have been around still at that point but not currently.

Matt M.

7/8/2025

I am currently looking for this brake magnet also.i am wondering if there is a left side and a right side for the magnets.also would like to see if there are cross reference numbers from Kelsey Hayes 79997 left and 79996 right and the Kelsey Hayes kit 56218. Trying to see if there is a cross reference with the Fayette Dayton W-2 8349 10.40” axle.are the magnets for this particular 1970’s model universal for left and right or must I have designated lefts and rights?

Jameson C.

7/8/2025

@MattM There wouldn't be a left and right hand side for the magnets. These are different from the Hayes magnets as well that you mentioned. Usually for stuff this old it's best to just swap to a modern axle with all modern components.

Mattm

7/8/2025

@JamesonC For our application it would. E too cost prohibitive to change out the hardware for our application.talking about $1000 plus dollars to do an upgrade plus removing a welded on backer plate for race axle x 4.the rest of the hardware is in good to excellent shape.with new brake shoes already ready to install. Some brake magnets are listed as lefts and rights.according to the numbers I previously mentioned.the 79997 being left side and the 79996 for the right side.I would think that if they were the same they wouldn’t be listed as left and right and with two different numbers.The Kelsey Hayes kit 56218 does not state a left or a right..These are discontinued parts from what i understand.But have found an oem stock that has dust on the box from storage.that I’m interested in getting but want to know if they are compatible. I do not have the resources of looking in an old catalog or a database that can cross reference the information.The Lafayette Dayton axle on the vintage wide world holiday rambler trailer 1978 has the left and and the right hand bolts instead of the studs and lug nuts.

Answer 1

The "D" designation that you see on the ST225/75-15 tires for your travel trailer indicate a bias ply tire, as opposed to the radial ply tires on your cargo trailer. The primary difference between bias and radial tires is how they're…

view full answer...

Answer 2

To mount the Channel Tongue Trailer Coupler - Trigger Latch - Bolt On #CT-5003-Z, I recommend using 1/2 inch bolts. The higher the grade, the stronger the bolt. I've attached the review video to help as you plan this installation.

view full answer...

Answer 3

The Replacement Wheel Stud, Screw-In, 1/2" x 2" #25-53 only includes one of the replacement wheel studs.

view full answer...

Answer 4

Hello Robert, thanks for reahcing out. Those 185100-150 brakes you mentioner are an older part that has been discontinued. We sold our last ones early 2024 and we will not be getting more stock. We do still have the Dexter Electric Trailer Brakes…

view full answer...

Answer 5

I have a many choices of steps for you, but unfortunately none that fit the measurements you gave. I have linked the page for you to all of our running boards and nerf bar options. If you click on the drop down to your cab style, you will see all of…

view full answer...

Answer 6

The Replacement Entry Door Hinge for RV #LC198295 has a standard leaf design that fits most RV's. The overall length is 9-1/4", and each leaf measures from 2-1/8" to 2-1/2" wide. As long as your current hinge has this much space…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

The replacement I recommend for an Atwood Surge Brake Actuator 85778 is the Demco Hydraulic Brake Actuator part #DM62VR. It has the same ball size, offers a bolt-on install, and has a greater capacity. The only difference is it has an electric…

view full answer...

Answer 9

Thanks for the photo. It appears you have just a standard manual lift vent, so my recommendation is to use the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White #V2092SP-28 or smoke colored cover #V2092SP-29. These…

view full answer...

Answer 10

For what you have you'd want the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies #AKEBRK-7-SA and you'd be set. This is a set of self adjusting brake assemblies that fit your axle/hub and will work…

view full answer...

Answer 11

Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…

view full answer...

Answer 12

Good question, Robert. There are indeed a few differences between all 3 of the Fogatti tankless water heaters and I have them listed out below: Fogatti InstaShower 7 Tankless Water Heater - 48,000 Btu #FG37FR -Lower Btu rating which is better for a…

view full answer...

Identify Older Hayes Brake Magnet

Product Page this Question was Asked From

Continue Researching