Troubleshooting The Curt T-Connector Wiring Harness On A 2012 Kia Soul
Updated 05/17/2017 | Published 05/16/2017 >
Products Featured in This Question
Question:
I purchased and installed the Curt T Connection Wire Harness C56222 for my 2012 Kia Soul. The brake lights and turn signals will not work if the vehicle tail lights. In order to get the trailer lights to function I have to unplug the vehicle tail lights. running light will work. I dont have LED taillights.
asked by: Dustin J
Expert Reply:
The first thing I would check is to ensure you have the pigtails attached to the taillights on the correct side of the vehicle, the driver's side pigtail from the harness will have a yellow wiring running in between the other wires whereas, the passenger side will not.
The next task would entail checking the ground wire on both the vehicle and trailer side of the harness to ensure a proper connection. Followed by using a circuit tester like part # PTW2993. You will want to ensure you have signal going into and coming out of the converter box. If you have an active power supply going into the box but not coming out, you may have have a shorted converter box that will need to be replaced. Lastly, be sure to check that all wires are in visual working order, meaning there are no noticeable pinches or frays.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hitch wiring
- Search Results: wiring
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer jack
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector


