How To Determine The Correct Rise/Drop For A Weight Distribution Shank For 2 Inch Hitch

Published 05/10/2017

Products Featured in This Question

Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW

(490)

$190.70

Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW

(491)

$203.32

Question:

What is the best shank for 2 inch receiver for weight distribution hitch how do you find the correct rise/drop

asked by: Darrel L

Expert Reply:

Choosing the proper shank is a very important task. The shank will correspond to the height of both the vehicle and trailer. In order to choose the proper shank, you will need to do a bit of measuring.

To select the correct rise/drop, you will first measure from the ground up until you reach the top of your vehicle's trailer hitch opening. You will then need to measure from the ground up until you reach the bottom of your trailer's coupler. The difference between the two will provided the correct amount of rise/drop you will need to look for in a shank. I have also attached an article that will further articulate the process for doing so.

For a maximum rise of 7" and a drop of EQ90-02-4100" I recommend the # EQ90-02-4500. For a maximum rise of 13" and a drop of 9" I recommend the # EQ90-02-4400.

I have also attached a link below to our selection of weight distribution shanks for 2 inch hitches.

expert reply by: Conner L