Hitch & Wiring for 2017 Toyota Sienna Towing Boat Trailer
Updated 05/09/2017 | Published 05/06/2017 >
Products Featured in This Question
Question:
I have a 2017 Sienna and want to haul a 3000 lb boat. Im looking a 75237 hitch and 118498 harness can I run the wire permanently under the vehicle and mount it to the hitch ?
asked by: Steve M
Expert Reply:
All versions of the 2017 Toyota Sienna have a towing capacity of 3500-lbs so your new vehicle is up to towing your 3000-lb boat and trailer. Do note that all auto makers recommend not towing anything for the first few hundred miles on the car to allow for proper break-in without putting extra stress on the vehicle.
Draw-Tite Class III hitch # 75237 is an excellent choice since it offers a 4500-lb capacity, providing a healthy safety margin. For a wiring harness part # 118498 is a fine choice. This harness installs both by plugging in at the vehicle taillights and by running one single 12V power wire from the battery to the harness module. This wire is typically run under the vehicle, along the frame rail. A helpful video and article are included to aid your installation. You may care to use wire loom such as # 39035 to protect that wire from the elements.
The actual 4-pole trailer wiring and plug can be mounted to the hitch using bracket # 18144 but actually the plug and wiring will hold up better if you simply store it inside the vehicle when you're not towing. Exposure to the elements will certainly cause the wiring to wear faster. If you prefer you can use a protective cap # C58200 too.
Please tell me if your boat uses electric drum brakes; in this case you will need additional components that I will be glad to help you with.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: wiring kits
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Brake Controller
- Search Results: trailer jack
- Search Results: trailer hitch ball mount
- Shop: Base Plate for Tow Bar
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector

