Is there a Titan Master Cylinder Bypass Port for a Model 60 Actuator
Updated 05/08/2017 | Published 05/05/2017
Question:
My Titan master cylinder has a bypass solenoid. The dump line goes back to a port on the end of the reservoir just above the output port. The one I ordered a couple of days ago doesnt have that dump port and couldnt really tell when ordering it that it wouldnt or that there were any options in that regard. Do you have the cylinder with the bypass return port? If not, I suspect I could reconfigure mine to use the the solonoid you sell, but would want to make sure Im not making a mistake. Its hard to take pictures without disassembling, but you should be able to see the configuration in what I attached.
asked by: Jim B
Expert Reply:
You must have an older model 60 actuator because the new ones and replacement master cylinders do not have the bypass port that you mentioned. So what you would do is use the master cylinder you have purchased and also replace the solenoid with # T4748800.
Product Page this Question was Asked From
Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Valve
- Dexter
more information >
Continue Researching
- Search Results: titan surge brake
- Search Results: surge brake reverse solenoid
- Shop: Reverse Lockout Solenoid Kit for Demco DA66B and DA70 Hydraulic Brake Actuators - Non-Bypass
- Q&A: How to Determine Spring-Center and Hub-Face Measurements when Building a Trailer
- Q&A: How to Find the Correct Brake Mounting Flange
- Search Results: torsion axle
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Q&A: My Surge Brakes Are Activating When I Back Up My Trailer - What Can I Do?
- Shop: CE Smith Frame Straps - 3-1/2" Hole to Hole Length - Galvanized - Qty 2
- Video: Review of Demco Brake Actuator - Reverse Lockout Solenois Kit - DM5836
- Video: The Low-Down on the Dexter Zinc-Plated Brake Actuator w/ Lockout Shield
- Video: Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators Review
- Video: Hands-On with the Replacement Consumer Lockout Key for Dexter Axle Brake Actuators
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Shop: Replacement Consumer Lockout Key for Dexter Axle Brake Actuators - Qty 1
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Titan Brake Actuator T2374600 Review
- Q&A: Solution for Reverse Lockout on Demco DA70 Actuator
- Q&A: Is There Manual Lockout Available for Demco Surge Actuator part # DM72VR
- Q&A: Replacement for a Tie Down Model 66 Drum Brake Actuator
- Q&A: Best Replacement for Atwood 82543 Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Most Popular Wheel Bearings
on Accessories and Parts
