Replacement Electric Brake Assembly for AL-KO 5,200 Pound Axle
Updated 04/26/2017 | Published 04/24/2017
Products Featured in This Question
Question:
i have a AL-KO 5200# axle it has 6 lugs which brake hub/drum do I get.
asked by: Alex
Helpful Expert Reply:
If you are just replacing the electric brake assemblies for your AL-KO 5,200 pound axle, I recommend looking at the etrailer.com Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-7-SA. These are 12 inch x 2 inch self-adjusting brakes designed for axle ratings of 5,200 pounds. They have a 5 bolt mounting flange bolt pattern and this kit includes both the left hand and right hand brake assembly. These self-adjusting brakes will not require periodic manual adjustments like standard brakes. After an initial adjustment, you will be good to go.
If you are also needing a hub and drum assembly, I have attached a link that will take you to our available selection of hub and drums with a 6 on 5-1/2 inch bolt pattern for 5,200 pound axles.I recommend pulling your existing hub to confirm the bearing numbers you currently have on your axle. The numbers should be stamped onto the bearings themselves. For example, the etrailer.com Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K has a # 25580 inner bearing and # 15123 outer bearing.
I have also attached a few articles on trailer brakes and hub assemblies that you may find helpful.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: The Low-Down on the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Search Results: trailer brakes
- Search Results: morryde trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ LRE Leaf Spring Suspensions
- Video: Feature Breakdown: Lippert Center Point by Trailair Air-Ride Suspension Upgrade
- Video: A Closer Look at the Bronze Bushing
- Video: etrailer And Dexter 7-Leaf Double-Eye Spring Comparison
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Let’s Check Out the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Search Results: bronze bushings
- Q&A: Comparing Roadmaster Comfort Ride And Lippert Center Point For A 2017 Grand Design Solitude 310GK
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Search Results: trailer leaf springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Brakes
