Recommended Trailer Hitch Receiver Compatible With Upgraded Dual Exhaust

Question

Question:

i have a 2013 gti with a upgraded exhaust dual will install fit?

asked by: Christian

0

Expert Reply:

For your 2013 VW GTI with dual exhaust, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24904. We have had customers fit this hitch on dual exhaust models. The shape of the Curt # C11000 would most likely not work as well with a dual exhaust system.

If you will be doing some light towing with this hitch, I recommend the Sportframe Drawbar 4" Rise 2000 lb Kit # 3594. You will need a hitch ball like # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch ball.

For vehicle wiring, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This harness comes with the connectors you need as well as the tester and the wire to connect the harness to your vehicle battery. This will protect your factory wiring from overload.

expert reply by: Jason S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

For your 2015 Volkswagen Golf Sportwagen the only trailer wiring kit we offer that has been confirmed as a fit is the part #119250KIT. This will require that you run a wire up to the batter of the vehicle as well. I attached an install video that…

view full answer...

Answer 5

The highest rise for a 1-1/4" ball mount we have available is 5-1/2", like with the Brophy #BM96. I know this isn't going to provide the perfect setup, but as long as you get within 1/2 to 1" or so of level, you shouldn't feel…

view full answer...

Answer 6

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 7

Replacement hardware is available. You will need part #RHK. Once on the product page, just type in the Hitch Item Number in the box on the right. Then use the pull down menu below that to select the manufacturer. Then just click the Add to Cart…

view full answer...

Answer 8

The Draw-Tite Sportframe Trailer Hitch Receiver part #24825 which is a fit for your 2012 Volkswagen Golf TDI does not require you to use the Curt Cam Buckle Stabilizing Strap part #18050 like the other option we have for you will, the Curt Trailer…

view full answer...

Answer 9

No, there are no other options for hitch that fit your 2012 VW Golf that we aren't showing; we want to give people as many options as possible so they can find the best part for them (so long as it fits) so we wouldn't hide anything. For a…

view full answer...

Answer 10

We can help you with replacement installation hardware for your Curt Class I hitch #C11000. Simply enter the part #RHK into the search box on our site and in the space provided enter the hitch item number C11000 and select Curt from the drop-down…

view full answer...

Recommended Trailer Hitch Receiver Compatible With Upgraded Dual Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching