Recommended Hub And Drum Assemblies With 5-On-5 Inch Bolt Pattern
Updated 03/22/2017 | Published 03/21/2017
Products Featured in This Question
Question:
How can I be sure of bolt pattern for drums and hubs? Its 3 inches center to center on studs and 5 lug.
asked by: Terry B
Expert Reply:
I've attached an article to help you with how to measure to determine your bolt pattern. With 3 inches on center, you have a 5 on 5 inch bolt pattern. The 5 on 5 bolt pattern is generally only found on 3500 lb axles. For a hub and drum assembly, I recommend the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 # AKHD-550-35-EZ-K if you have the EZ lube spindles or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 # AKHD-550-35-K if you have standard spindles without the grease zerk.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Easy Grease Trailer Hub and Drum Assembly Feature Review
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Replacement Hub Not Fitting As Expected
- Q&A: Adding Electric Drum Brakes to a Shelby Tandem Axle Trailer
- Video: Feature Breakdown: 7-Way Round RV Style Trailer Connector
- Video: Hands-On with the Trailer Hub and Drum Assembly
- Video: Complete Breakdown of the etrailer 7-Way RV Style Connector with Molded Cable
- Shop: 12 Gauge 7 Conductor Jacketed Wire - Per Foot
- Shop: etrailer 7-Way RV Style Connector with Molded Cable - Trailer End - 6' Long - RV Standard
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: 7-Way Round RV Style Trailer Connector - Trailer Side
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
on Trailer Hubs and Drums
