Replacement Head and Hardware For Husky Center Line Weight Distribution System

Question

Question:

Do you provide the hitch head and shank ONLY for Husky Center Line Weight Distribution w/Sway Control model HT32218? Please let me know and thanks.

asked by: Jabr A

0

Expert Reply:

You will need a few items to replace the head for your Husky Centerline Weight Distribution system, part # HT32218.

First, you will need the replacement head, part # HT32328. Since the ball platform and the hardware are sold separately I will also list those. For the ball mount you will need part # HT32336. For the mounting hardware you will need part # HT32340.

The shank that comes with the # HT32218 system is part # HT31518. This 10-inch long shank has a 6-1/2 rise and 1-1/4 inch drop.

Actually, by the time you purchase all of these parts you will save money by purchasing an entire new # HT32218 system.

expert reply by: Jeffrey L

0

Answer 1

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 2

To provide a 2 inch hitch ball for your Trailer Valet XL #TVXL25 that came with a 2-5/16 inch ball, you can use the 2 Inch Hitch Ball for Trailer Valet XL Trailer Dolly #TVHB2. This part number will provide you with a new 2 inch diameter ball for…

view full answer...

Answer 3

Yes, you can swap the 2" hitch ball #HT33853 on your 6K Husky Center Line Weight Distribution #HT32215 with the 2-5/16" hitch ball #HT39386 since your newer trailer has a larger coupler size. You just need a 1-7/8" socket like part…

view full answer...

Answer 4

While I can sympathize with your issue, it is not safe to tow a trailer if you only have a 2" hitch ball and your trailer coupler is designed for a 2-5/16" hitch ball, even for a short distance; the insecure connection between hitch ball…

view full answer...

Answer 5

After speaking to my contact at Husky I found that the ball platform bushing is something the can be purchased separately part #HT32336. This bushing will only work with 1-1/4 inch outer diameter shanks. The bushing will be 7/16 inches thick by…

view full answer...

Answer 6

All you will need is a mushing #58184 that will allow you to use the 1 inch ball shank in the 1-1/4 inch diameter hole on your weight distribution head. If you instead decide to get a new ball you can use #19286.

view full answer...

Answer 7

The main difference between weight distribution that are compatible with surge brakes and systems that are not is the design of the the spring bars. The Equal-i-zer Weight Distribution System #EQ37100ET has straight spring bars that are designed to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Replacement Head and Hardware For Husky Center Line Weight Distribution System

Continue Researching