Will Lippert LCI Powered Trailer Jack Require Grease Maintenance

Question

Question:

Do i grease any areas of the jack? I have had mine for two years and it works great.

asked by: Kris L

0

Expert Reply:

I spoke to my contact at Lippert and they confirmed that the Electric Tongue Jack # LC285318 does not require any grease maintenance. Therefore they didn't include a grease zerk, which is why you are unable to locate one.

expert reply by: Jameson C

0

Answer 1

I spoke to my contact at Dexter and he informed me that they recommend greasing the E-Z Flex equalizers every three months or 3,000 miles. I also attached a pretty helpful guide to how often trailer components should be maintained. For grease Dexter…

view full answer...

Answer 2

There wouldn't be anything else that you could check on the Lippert Electric Trailer Jack with Footplate #LC285318 since the only issue you'd probably have would be internally with either the threaded rod or gears. Most likely you'll be…

view full answer...

Answer 3

Lippert does not offer a replacement inner jack tube for their jack 1817941. When a jack is damaged in this way (which is more common than you want to know) it really is best to replace the entire jack for safety reasons. The outer tube on your jack…

view full answer...

Answer 4

What you're needing is the Replacement Override Nut #LC55FR Lippert Electric Trailer Jack #LC285318 (which is the same as the part #LC421366 that you referenced). I confirmed this with my contact at Lippert.

view full answer...

Answer 5

I checked and found the manual for the Lippert Electric Trailer Jack #LC285318 and there was no mention of anything going in the hole beforehand to tighten them. I added a cut out of the manual for you which shows the parts for this jack, and it does…

view full answer...

Answer 6

The Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 you referenced are simply replacements for the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers #K71-652-00. To…

view full answer...

Answer 7

Yes, the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 will work for your trailer since the dimensions match with your current equalizers. These will work with axles up to 6,000lbs. I believe the kit…

view full answer...

Answer 8

If you had originally put on just the equalizers #K71-654-00 and not the kit #K71-652-00 then that could be part of the problem you had. The E-Z Flex systems use special shackle straps and wet bolts. Considering the damage that was done it is…

view full answer...

Answer 9

Since the horizontal mounting holes on your current equalizers are 6" apart on center I recommend the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle #K71-654-00 which has a width range of…

view full answer...

Answer 10

I would be happy to help you find the best suspension upgrades for your Winnebago 2455BHS Travel Trailer. First while we do not carry the blue version of the Road armor 3500-8000lb equalizers you mentioned, the Road Armor #LC696740 are the exact same…

view full answer...

Answer 11

I would be happy to help! Since the horizontal mounting hole measurement of the equalizers on your 2016 Winnebago 2351DKS is 5-1/2" there are a few different equalizer upgrade options. To determine which one will be best for you, you will need…

view full answer...

Answer 12

I would be happy to help you determine if the Road Armor Shock Absorbing Equalizers #LC696740 you were looking at will fit your 2021 Forest River Sabre 36BHQ, but this is not information that we have on hand so you will need to measure your current…

view full answer...

Will Lippert LCI Powered Trailer Jack Require Grease Maintenance

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching